logo

LM393

UTC
Part Number LM393
Manufacturer UTC
Title DUAL DIFFERENTIAL COMPARATOR
Description The UTC LM393 consists of two independent voltage comparators, designed specifically to operate from a single power supply over a wide voltage ran...
Features * Single or dual supply operation. * Wide operating supply range (VCC=2V ~ 36V or ±1 ~ ±18V) * Input common-mode voltage includes ground. * Low supply current drain ICC=0.8mA (Typical). * Low input bias current IBIAS=25nA (Typical). * Output compatible with TTL, DTL, and CMOS logic system. DIP-8 S...

Published Apr 12, 2007
Datasheet PDF File LM393 File

LM393   LM393   LM393  




LM393

HTC
Part Number LM393
Manufacturer HTC
Title DUAL VOLTAGE COMPARATOR
Description SOP 8 / DIP 8 Pin Configulation Out 1 8 Vcc SOP-8 PKG IN1(-) 2 A 7 Out2 B IN1 (+) 3 - + + - 6 IN2 (-) DIP-8 PKG Gnd 4 5 IN2 (+) ORDERI.
Features
● Single Supply Operation : 2V to 30V
● Dual Supply Operation : ±1V to ±15V
● Allow Comparison of Voltages Near Ground Potential
● Compatible with all Forms of Logic
● Low Input Biasing Current
● Low Input Offset Current
● Low Offset Voltage
● Moisture Sensitivity Level 3
● Low supply current drain .

Datasheet PDF File LM393 File

LM393   LM393   LM393  




LM393

National Semiconductor
Part Number LM393
Manufacturer National Semiconductor
Title Low Power Low Offset Voltage Dual Comparators
Description The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max for two compa.
Features n Wide supply — Voltage range: — single or dual supplies: 2.0V to 36V ±1.0V to ±18V n Very low supply current drain (0.4 mA) — independent of supply voltage n Low input biasing current: 25 nA n Low input offset current: ±5 nA n Maximum offset voltage: ±3 mV n Input common-mode voltage ra.

Datasheet PDF File LM393 File

LM393   LM393   LM393  




LM393

NXP
Part Number LM393
Manufacturer NXP
Title Low power dual voltage comparator
Description The LM193 series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0 mV max. for two comp.
Features
• Wide single supply voltage range 2.0 VDC to 32 VDC, or dual supplies ±1.0 VDC, to ±16 VDC
• Very low supply current drain (0.8 mA) independent of supply voltage (2.0 mW/comparator at 5.0 VDC)
• Low input biasing current 25 nA
• Low input offset current ±5 nA and offset voltage ±2 mV
• Input common.

Datasheet PDF File LM393 File

LM393   LM393   LM393  




LM393

Motorola  Inc
Part Number LM393
Manufacturer Motorola Inc
Title SINGLE SUPPLY/ LOW POWER DUAL COMPARATORS
Description Order this document by LM393/D LM393, LM393A, LM293, LM2903, LM2903V Low Offset Voltage Dual Comparators The LM393 series are dual independent pr.
Features high gain, wide bandwidth characteristics. This gives the device oscillation tendencies if the outputs are capacitively coupled to the inputs via stray capacitance. This oscillation manifests itself during output transitions (VOL to VOH). To alleviate this situation, input resistors < 10 kΩ should b.

Datasheet PDF File LM393 File

LM393   LM393   LM393  




LM393

ON Semiconductor
Part Number LM393
Manufacturer ON Semiconductor
Title Low Offset Voltage Dual Comparators
Description DATA SHEET www.onsemi.com Low Offset Voltage Dual Comparators LM393, LM393E, LM293, LM2903, LM2903E, LM2903V, NCV2903 The LM393 series are dual i.
Features
• Wide Single−Supply Range: 2.0 Vdc to 36 Vdc
• Split−Supply Range: ±1.0 Vdc to ±18 Vdc
• Very Low Current Drain Independent of Supply Voltage: 0.4 mA
• Low Input Bias Current: 25 nA
• Low Input Offset Current: 5.0 nA
• Low Input Offset Voltage: 5.0 mV (max) LM293/393
• Input Common Mode Range to Gr.

Datasheet PDF File LM393 File

LM393   LM393   LM393  






Since 2006. 0PDF.com,