| Part Number | MIC2561 |
| Manufacturer | Micrel Semiconductor |
| Title | PCMCIA Card Socket Switching Matrix |
| Description | Applications The MIC2561 VCC & VPP Matrix controls PCMCIA (Personal Computer Memory Card International Association) memory card power supply pin... |
| Features |
overcurrent and thermal protection of the power outputs, zero current “sleep” mode, suspend mode, low power dynamic mode, and ON/OFF control of the PCMCIA socket power.
The MIC2561 is designed for efficient operation. In standby (“sleep”) mode the device draws very little quiescent current, typical... |
| Published | Mar 26, 2005 |
| Datasheet |
 MIC2561 File
|
| Part Number | MIC2569 |
| Manufacturer | Micrel Semiconductor |
| Title | Power Switch |
| Description | MIC2569 is designed to supply power to OpenCable™ systems and CableCARD™ hosts. These CableCARDs are also known as Point of Distribution (POD) car. |
| Features |
• 110 mΩ maximum VCC on resistance • 400 mΩ maximum VPP on resistance • 3.0V to 3.6V for the 3.3VIN operating range • 3.0V to 5.5V for the 5VIN operating range • 1.3A minimum VCC current limit • 150mA minimum VPP current limit (150mA each) • Compact 16-pin QSOP packaging • Operating temperatures fro. |
| Datasheet |
MIC2569 File
|
| Part Number | MIC2568 |
| Manufacturer | Micrel Semiconductor |
| Title | Dual-Slot PC Card/CardBus Power Controller |
| Description | The MIC2568 dual-slot PC Card / CardBus power controller is a VCC and VPP power switch matrix that supports 3.3V and 5V PC Card (PCMCIA) slot powe. |
| Features |
well-controlled voltage rise and fall times. Each MIC2568 output voltage is switched by two digital inputs, typically controlled from a separate PC Card logic controller. The MIC2568 is designed for efficient operation. In standby (sleep) mode the device draws very little quiescent current, typicall. |
| Datasheet |
MIC2568 File
|
| Part Number | MIC2566 |
| Manufacturer | Micrel Semiconductor |
| Title | Single-Slot PC Card/CardBus Power Controller |
| Description | The MIC2566 single-slot PC Card / CardBus power controller is a VCC and VPP power switch matrix that supports 3.3V and 5V PC Card (PCMCIA) slot po. |
| Features |
well-controlled voltage rise and fall times. Each MIC2566 output voltage is switched by two digital inputs, typically controlled from a separate PC Card logic controller. The MIC2566 is designed for efficient operation. In standby (sleep) mode the device draws very little quiescent current, typicall. |
| Datasheet |
MIC2566 File
|
| Part Number | MIC2564A |
| Manufacturer | Micrel Semiconductor |
| Title | Dual Serial PCMCIA/CardBus Power Controller |
| Description | The MIC2564A is dual-slot PC Card (PCMCIA) and CardBus power controller. It is a sophisticated power switching matrix that controls VCC and VPP vo. |
| Features |
an efficient standby (sleep) mode at 0.3µA typical quiescent current. 12V and 5V supplies are not required for MIC2564A operation making it possible to omit one or both supplies when they are not needed by the system. An internal charge pump supplies the internal bias voltages required for high-perf. |
| Datasheet |
MIC2564A File
|
| Part Number | MIC2563A |
| Manufacturer | Micrel Semiconductor |
| Title | Dual Slot PCMCIA/CardBus Power Controller |
| Description | The MIC2563A dual-slot PCMCIA (Personal Computer Memory Card International Association) and CardBus power controller handles all PC Card slot powe. |
| Features |
• Single package controls two PC Card slots • High-efficiency, low-resistance switches require no 12V bias supply • No external components required • Output current limit and overtemperature shutdown • Ultra-low power consumption • Complete dual-slot PC Card/CardBus VCC and VPP switch matrix in a si. |
| Datasheet |
MIC2563A File
|
