www.Datasheet-PDF.com

5.0SMDJ14C Datasheet PDF

5.0SMDJ14C
SOCAY

Part Number 5.0SMDJ14C
Description Surface Mount Transient Voltage Suppressors
Page 7 Pages
5.0SMDJ14C datasheet pdf
Download PDF for PC
5.0SMDJ14C pdf
View HTML (Mobile)
Surface Mount Transient Voltage Suppressors (TVS)
5.0SMDJ Series 11 To 440 V 5000W
Description
The 5.0SMDJ series is designed specifically to protect sensitive electronic
equipment from voltage transients induced by lightning and other transient
voltage events.
Features
u For surface mounted applications in order to optimize board space
u Low leakage
u Uni and Bidirectional unit
u Glass passivated junction
u Low inductance
u Excellent clamping capability
u 5000W Peak power capability at 10 × 1000µs waveform Repetition
rate (duty cycle):0.01%
u Fast response time: typically less than 1.0ps from 0 Volts to VBR min
u Typical IR less than 5μA above 25V.
u High Temperature soldering: 260°C/40 seconds at terminals
u Typical maximum temperature coefficient ΔVBR = 0.1% ×
VBR@25°C× ΔT
u Plastic package has Underwriters Laboratory Flammability 94V-0
u Matte tin leadfree Plated
u Halogen free and RoHS compliant
u Typical failure mode is short from over-specified voltage or current
u Whisker test is conducted based on JEDEC JESD201A per its table
4a and 4c
u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
u ESD protection of data lines in accordance with IEC 61000-4-2
(IEC801-2)
u EFT protection of data lines in accordance with IEC 61000-4-4
(IEC801-4)
Uni-directional
Bi-directional
Functional Diagram
Cathode
Bi-directional
Uni-direction
Anode
Applications
TVS devices are ideal for the protection of I/O interfaces, VCC
bus and other vulnerable circuits used in Telecom, Computer,
Industrial and Consumer electronic applications.
Maximum Ratings (TA=25unless otherwise noted)
Parameter
Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note
1), (Note 2)
Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3)
Symbol
PPPM
IPP
Power Dissipation on Infinite Heat Sink at TL=75°C
PM(AV)
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only
(Note 4)
IFSM
VF
Operating junction and Storage Temperature Range.
TJ , TSTG
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.
Value
5000
See Next Table
6.5
300
3.5/5.0
-55 to +150
Unit
Watts
Amps
Watt
Amps
Voltage
°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
1/7
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

















No preview available


5.0SMDJ14C datasheet pdf
Download PDF for PC
5.0SMDJ14C pdf
View HTML (Mobile)

Related : Start with 5.0SMDJ14 Part Numbers by
5.0SMDJ14 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR 5.0SMDJ14
KD
5.0SMDJ14 pdf
5.0SMDJ14 5000 WATT TVS COMPONENT 5.0SMDJ14
Protek Devices
5.0SMDJ14 pdf
5.0SMDJ14 Surface Mount Transient Voltage Suppressors 5.0SMDJ14
SOCAY
5.0SMDJ14 pdf
5.0SMDJ14 SURFACE MOUNT TVS DIODE 5.0SMDJ14
RFE
5.0SMDJ14 pdf
5.0SMDJ14 TRANSIENT VOLTAGE SUPPRESSORS 5.0SMDJ14
Dc Components
5.0SMDJ14 pdf
5.0SMDJ14 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODES 5.0SMDJ14
Sunmate
5.0SMDJ14 pdf
5.0SMDJ140 Surface Mount Transient Voltage Suppressors 5.0SMDJ140
SOCAY
5.0SMDJ140 pdf
5.0SMDJ140 SURFACE MOUNT TVS DIODE 5.0SMDJ140
RFE
5.0SMDJ140 pdf
5.0SMDJ140 TRANSIENT VOLTAGE SUPPRESSORS 5.0SMDJ140
Dc Components
5.0SMDJ140 pdf



Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact