www.Datasheet-PDF.com

5KP54C Datasheet PDF

5KP54C
SOCAY

Part Number 5KP54C
Description Axial Lead Transient Voltage Suppressors
Page 6 Pages
5KP54C datasheet pdf
Download PDF for PC
5KP54C pdf
View HTML (Mobile)
Axial Lead Transient Voltage Suppressors (TVS)
5KP Series 5.0 To 190 V 5000W
Description
The 5KP series is designed specifically to protect sensitive electronic
equipment from voltage transients induced by lightning and other transient
voltage events.
Features
u Glass passivated chip junction in P600 Package
u Low leakage
u Uni and Bidirectional unit
u Excellent clamping capability
u 5000W Peak power capability at 10 × 1000µs waveform Repetition
rate (duty cycle):0.01%
u Fast response time: typically less than 1.0ps from 0 Volts to VBR min
u Typical IR less than 5μA above 12V.
u High Temperature soldering: 260°C/40 seconds at terminals
u Typical maximum temperature coefficient ΔVBR = 0.1% ×
VBR@25°C× ΔT
u Plastic package has Underwriters Laboratory Flammability 94V-0
u Matte tin leadfree Plated
u Halogen free and RoHS compliant
u Typical failure mode is short from over-specified voltage or current
u Whisker test is conducted based on JEDEC JESD201A per its table
4a and 4c
u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
u ESD protection of data lines in accordance with IEC 61000-4-2
(IEC801-2)
u EFT protection of data lines in accordance with IEC 61000-4-4
(IEC801-4)
Uni-directional
Bi-directional
Functional Diagram
Bi-directional
Cathode
Uni-direction
Agency Approvals
Anode
Applications
TVS devices are ideal for the protection of I/O interfaces, VCC bus and other
vulnerable circuits used in Telecom, Computer, Industrial and Consumer
electronic applications.
AGENCY
AGENCY FILE NUMBER
E341027
Maximum Ratings (TA=25unless otherwise noted)
Parameter
Symbol
Peak Pulse Power Dissipation with a 10/1000µs waveform (Fig.1)(Note
1), (Note 2)
Peak Pulse Current with a 10/1000µs waveform.(Note1,Fig.3)
Power Dissipation on Infinite Heat Sink at TL=75°C
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only
(Note 4)
PPPM
IPP
PM(AV)
IFSM
VF
Operating junction and Storage Temperature Range.
TJ , TSTG
Notes:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.
Value
5000
See Next Table
8.0
500
3.5/5.0
-55 to +150
Unit
Watts
Amps
Watt
Amps
Voltage
°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
1/6
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.

















No preview available


5KP54C datasheet pdf
Download PDF for PC
5KP54C pdf
View HTML (Mobile)

Related : Start with 5KP54 Part Numbers by
5KP54 5000 Watt Axial Lead TVS 5KP54
GW
5KP54 pdf
5KP54 Axial Lead Transient Voltage Suppressors 5KP54
SOCAY
5KP54 pdf
5KP54 5000W TRANSIENT VOLTAGE SUPPRESSOR 5KP54
Microsemi
5KP54 pdf
5KP54 5000W TRANSIENT VOLTAGE SUPPRESSOR 5KP54
Digitron Semiconductors
5KP54 pdf
5KP54 GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS 5KP54
LITE-ON
5KP54 pdf
5KP54 5kW POWER TVS COMPONENT 5KP54
Protek Devices
5KP54 pdf
5KP54 Transient Voltage Suppressors 5KP54
HITANO
5KP54 pdf
5KP54 TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR 5KP54
General Semiconductor
5KP54 pdf
5KP54 GPP TRANSIENT VOLTAGE SUPPRESSOR 5KP54
Rectron Semiconductor
5KP54 pdf



Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact