U-MD-88063 Datasheet PDF - UNION


www.Datasheet-PDF.com

U-MD-88063
UNION

Part Number U-MD-88063
Description 880nm Laser Diode Module
Page 2 Pages

U-MD-88063 datasheet pdf
View PDF for PC
U-MD-88063 pdf
View PDF for Mobile


No Preview Available !

U-MD-88063
880nm Laser Diode Module
UNION OPTRONICS CORP.
880nm less 6mW dia 9.8mm Laser Diode Module (Class b)
U-MD-88063
Specifications(Tc=25+/- 3)
Item
Characterization
Laser spot
Circle
Applicable Lens
A plastic lens for each unit
Wire
Solder Material
Body
26 AWG PVC-Free
NIHON GENMA SOLDER (Lead-Free)NP 303 YS RMA 0.8
mm
NP601 SZ 555 GK
Brass
Remark
External dimensions(Unit : mm)
Default tolerance+/- 0.5
Condition
Parameter
Storage Temperature and
Humidity
Operating Temperature
and Humidity
Min.
-25
40
0
20
Typ.
-
-
-
-
Max.
70
95
40
80
Unit
Rh
Rh
Remark
Storage in 3
weeks
No Condense
友嘉科技股份有限公司
桃園縣楊梅鎮3鄰高獅路156
UNION OPTRONICS CORP.
No, 156 Kao-Shy Road Yang-Mei, Tao-Yuan, Taiwan, R.O.C.
TEL : 886-3-485-2687
FAX : 886-3-475-4378
E-mail : marketing@uocnet.com
Ver.1 2009/03



No Preview Available !

880nm Laser Diode Module
U-MD-88063
UNION OPTRONICS CORP.
Electrical and Optical Characteristics(Tc=25+/- 3)
Parameter
Min.
Typ.
Max.
Input power source
-
3.1
-
Consumption Current
-
25 40
Output power
4
-
6
Beam Dimension @3m - 3.5 X 1.7 (±0.5) -
Beam Dimension @6m Φ10 - Φ15
Wavelength 870 880 890
Life Time
- 10000 -
* Wire DefinitionDC +3.1V -- Red colorGND -- White color
Unit
Volt
mA
mW
mm2
mm
nm
hrs
Remark
±10%
Class b
No ghost spot
Reliability test
Item
Vibration test
Drop test
Voltage test
Temperature test
Characterization
Depend on customer
8 times at 1meter after packing
2.6V 3.5V
0℃ ~ 40
Remark
Precautions
Heat Sinking
If the case temperature of the laser diode exceeds its maximum specification, premature or
catastrophic failure may occur. To ensure the maximum life of the laser diode, it is recommended
that an additional electrically insulated heatsink, of at least 35sq.cm. be used. Thermal transfer
cream can be used to improve contact and heat dissipation. Do not restrict air circulation around
the device.
Power Connections
The Compact laser diode modules require a regulated input voltage of 2.5-3.5V DC. Connections
are made via the 2 pre-tinned external flying leads, (red is positive, white is negative).
WARNING: The housing is internally connected to the positive supply rail.
Specifications subject to change without notice.
Laser Safety
1. Do not look into the laser beam directly by eyes. The laser beam may cause severe damage to
human eyes.
2. Optical Lens is made of plastic or glass . Do not contaminate lens by soiling, oil or chemical.
UNION OPTRONICS CORP.




U-MD-88063 datasheet pdf
Download PDF
U-MD-88063 pdf
View PDF for Mobile


Similiar Datasheets : U-MD-88063

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact