P0080SDLRP Datasheet PDF - Littelfuse


www.Datasheet-PDF.com

P0080SDLRP
Littelfuse

Part Number P0080SDLRP
Description Protection Thyristors
Page 4 Pages

P0080SDLRP datasheet pdf
View PDF for PC
P0080SDLRP pdf
View PDF for Mobile


No Preview Available !

SIDACtor® Protection Thyristors
High Surge Current Protection
High Surge Current Series - DO-214
RoHS
Pb e3
Agency Approvals
Agency
Agency File Number
E133083
Pinout Designation
Not Applicable
Schematic Symbol
Description
The High Surge Current DO-214 Series are SIDACtor®
thyristors designed to protect equipment located in hostile
environments from overvoltage transients.
The series provides a 200A 10/1000 μs rated surface
mount solution that enables equipment to comply with
enhanced surge requirments now specified in regulatory
and customer requirements.
Features and Benefits
• Low voltage overshoot
• Low on-state voltage
• Does not degrade
surge capability after
multiple surge events
within limit.
• Fails short circuit when
surged in excess of
ratings
• 200A 10x1000 Surge
Rating
• 1000A 2x10 Surge
Rating
• RoHS Compliant and
Halogen-Free
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Applicable Global Standards
• TIA-968-A
• TIA-968-B
• ITU K.20/21/45 Enhanced
Level
• ITU K.20/21/45 Basic
Level
• GR 1089 Inter-building
• GR 1089 Intra-building
• IEC 61000-4-5 2nd
edition
• YD/T 1082
• YD/T 993
• YD/T 950
Electrical Characteristics
Part Number
P0080SDLRP
P0640SDLRP
P0720SDLRP
P0900SDLRP
P1100SDLRP
P1300SDLRP
P1500SDLRP
P1800SDLRP
P2300SDLRP
P2600SDLRP
P3100SDLRP
P3500SDLRP
Marking
P-8D
P06D
P07D
P09D
P11D
P13D
P15D
P18D
P23D
P26D
P31D
P35D
VDRM
@lDRM=5µA
V min
6
58
65
75
90
120
140
170
190
220
275
320
VS
@100V/µs
V max
25
77
88
98
130
160
180
220
260
300
350
400
Notes:
-
-
Absolute maximum ratings measured
Components are bi-directional (unless
aotthTeA=rw2i5sºeCn(outnelde)s.s
otherwise
noted).
** Will meet 4.4A power cross requirement without fire hazard.
IH IS IT**
mA min mA max
50 800
50 800
50 800
50 800
50 800
50 800
50 800
50 800
50 800
50 800
50 800
50 800
A max
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
VT
@IT=2.2A
V max
4
4
4
4
4
4
4
4
4
4
4
4
Capacitance
@1MHz, 2V bias
pf min
50
100
100
95
75
65
60
50
50
50
45
45
pF max
150
160
150
140
115
100
90
90
80
75
70
65
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17



No Preview Available !

SIDACtor® Protection Thyristors
High Surge Current Protection
Surge Ratings
0.2/310 1
0.5/700 2
A min
D ­—
Notes:
1 Current waveform in µs
2 Voltage waveform in µs
2/10 1
2/10 2
A min
1000
8/20 1
1.2/50 2
A min
800
10/160 1
10/160 2
A min
­—
IPP
10/560 1
10/560 2
A min
­—
5/320 1
9/720 2
A min
­—
10/360 1
10/360 2
A min
­—
10/1000 1
10/1000 2
A min
200
5/310 1
10/700 2
A min
­350
50/I6TS0MHz
di/dt
A min A/µs max
50 1000
-
-
-
TPIPhePearakctopinmuglsspeoanpceupnrlirtceamnbtulersatotiivnnegitria(tIelPlyPm) bipseerrienaptutehrteeitrirmvaenaagl needqougfiul-i4ba0rriaºuCnmtetowed+it8hfo5-rº4Ct0h°eCli<feToJ f<th+e15p0ro°Cduct
that
remains
in
thermal
equilibrium.
Thermal Considerations
Package
DO-214AA
Symbol
TJ
TS
R0JA
Parameter
Operating Junction Temperature Range
Storage Temperature Range
Thermal Resistance: Junction to Ambient
Value
-40 to +150
-65 to +150
90
Unit
°C
°C
°C/ W
V-I Characteristics
+I
IT
IS
IH
IDRM
-V
+V
VT VDRM
VS
-I
Normalized VS Change vs. Junction Temperature
14
12
10
8
6
4 25 °C
2
0
-4
-6
-8
-40 -20 0 20 40 60 80 100 120 140 160
JunctionTemperature (TJ) – °C
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17
tr x td Pulse Waveform
tr = rise time to peak value
100
Peak
Value
td = decay time to half value
Waveform = tr x td
50 Half Value
0
0 tr
td
t – Time (µs)
Normalized DC Holding Current vs. Case Temperature
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20
25°C
0 20 40 60 80 100 120 140 160
CaseTemperature (TC) - ºC



No Preview Available !

SIDACtor® Protection Thyristors
High Surge Current Protection
Soldering Parameters
Reflow Condition
-Temperature Min (Ts(min))
Pre Heat -Temperature Max (Ts(max))
-Time (Min to Max) (ts)
Average
to peak)
ramp
up
rate
(Liquidus
Temp
(TL)
TS(max) to TL - Ramp-up Rate
Reflow
-Temperature (TL) (Liquidus)
-Temperature (tL)
PeakTemp (TP)
Time within 5°C of actual PeakTemp (tp)
Ramp-down Rate
Time 25°C to PeakTemp (TP)
Do not exceed
Pb-Free assembly
(see Fig. 1)
+150°C
+200°C
60-180 secs.
3°C/sec. Max.
3°C/sec. Max.
+217°C
60-150 secs.
+260(+0/-5)°C
30 secs. Max.
6°C/sec. Max.
8 min. Max.
+260°C
Physical Specifications
Lead Material
Copper Alloy
Terminal Finish
Body Material
100% Matte-Tin Plated
UL Recognized epoxy meeting flammability
classification V-0 per Underwriters
Laboratories
Part Numbering
P xxx 0 S DL RP
TYPE
P: SIDACtor
MEDIAN VOLTAGE
CONSTRUCTION VARIABLE
REEL PACK
RoHS COMPLIANT
IPP RATING
PACKAGE TYPE
TP
TL
TS(max)
Figure 1
Ramp-up
TS(min)
25
Preheat
tS
time to peak temperature
(t 25ºC to peak)
tP
Critical Zone
TL to TP
tL
Ramp-down
Time
Environmental Specifications
High Temp Voltage
Blocking
Temp Cycling
Biased Temp &
Humidity
High Temp Storage
Low Temp Storage
Thermal Shock
Autoclave (Pressure
Cooker Test)
Resistance to Solder
Heat
Moisture Sensitivity
Level
80% Rated VDRM (VAC Peak ) +125°C or +150°C,
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
-65°C to +150°C, 15 min. dwell, 10 up to 100
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/
JEDEC, JESD22-A-101
+150°C 1008 hrs. MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
-65°C, 1008 hrs.
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
+121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/
JEDEC, JESD22-A-102
+260°C, 30 secs. MIL-STD-750 (Method 2031)
85%RH, +85°C, 168 hrs., 3 reflow cycles
(+260°C Peak). JEDEC-J-STD-020, Level 1
Part Marking
Pxxx
xxxxx
Part Marking Code
(Refer to Electrical Characteristics Table)
Date Code
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17



No Preview Available !

SIDACtor® Protection Thyristors
High Surge Current Protection
Dimensions — DO-214AA
Case
Pad Outline
B
D
Temperature
Measurement
Point
0.079
(2.0)
CA
0.110
(2.8)
0.079
(2.0)
inch
(millimeter)
HF
E
KG
Dimensions
A
B
C
D
E
F
G
H
K
Inches
Min Max
0.130
0.201
0.077
0.159
0.030
0.075
0.002
0.077
0.006
0.156
0.220
0.087
0.181
0.063
0.096
0.008
0.104
0.016
Millimeters
Min Max
3.30
5.10
1.95
4.05
0.75
1.90
0.05
1.95
0.15
3.95
5.60
2.20
4.60
1.60
2.45
0.20
2.65
0.41
Packing Options
Package
Type
Description
Quantity
Added
Suffix
S
DO-214AA
Tape and Reel Pack
2500
RP
Industry
Standard
EIA-481-D
Additional Information
Datasheet
Resources
Samples
Tape and Reel Specification — DO-214AA
0.157
(4.0)
0.472
(12.0)
0.36
(9.2)
0.512 (13.0)
Arbor Hole Dia.
0.315
(8.0)
12.99
(330.0)
0.059
(1.5)
DIA
Cover tape
Dimensions are in inches
(and millimeters).
0.49
(12.4)
Direction of Feed
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17




P0080SDLRP datasheet pdf
Download PDF
P0080SDLRP pdf
View PDF for Mobile


Similiar Datasheets : P0080SDLRP

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact