P0080SB Datasheet PDF - SOCAY

www.Datasheet-PDF.com

P0080SB
SOCAY

Part Number P0080SB
Description Thyristor Surge Suppressors
Page 5 Pages


P0080SB datasheet pdf
Download PDF
P0080SB pdf
View PDF for Mobile

No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080SB - P5000SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Description
P0080SB - P5000SB Series are designed to protect broadband
equipment such as modems, line card, CPE and DSL from
damaging over-voltage transients.
The series provides a surface mount solution that enables
equipment to comply with global regulatory standards.
Features and Benefits
u Low voltage overshoot
u Low on-state voltage
u Does not degrade surge capability after multiple surge events
within limit
u Fails short circuit when surged in excess of ratings
u Low Capacitance
Applicable Global Standards
u TIA-968-A
u ITU K.20/21 Enhanced level
u ITU K.20/21 Basic Level
u GR 1089 Inter building
u GR 1089 Inter building
u IEC 6100-4-5
u YD/T 1082
u YD/T 993
u YD/T 950
Schematic Symbol
Electrical Parameters
Parameter
IS
IDRM
IH
IT
VS
VDRM
VT
C0
Definition
Switching Current - maximum current required to switch to
on state
Leakage Current - maximum peak off-state current
measured at VDRM
Holding Current - minimum current required to maintain on
state
On-state Current - maximum rated continuous on-state
current
Switching Voltage - maximum voltage prior to switching to
on stat
Peak Off-state Voltage - maximum voltage that can be
applied while maintaining off state
On-state Voltage - maximum voltage measured at rated
on-state current
Off-state Capacitance - typical capacitance measured in
off state
-V
+I
IT
IS
IH
IDRM
VT VDRM
VS
+V
-I
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
1/5
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.



No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080SB - P5000SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Electrical Characteristics
Part
Number
Marking
VDRM
@IDRM=5μA
V min
VS
@100V/μS
V max
VT
@IT=2.2A
V max
P0080SB
P0300SB
P008B
P03B
6
25
25
40
4
4
P0640SB
P06B
58
77
4
P0720SB
P07B
65
88
4
P0900SB
P1100SB
P1300SB
P09B
P11B
P13B
75
90
120
98
130
160
4
4
4
P1500SB
P1800SB
P2000SB
P15B
P18B
P20B
140
170
180
180
220
220
4
4
4
P2300SB
P2600SB
P3100SB
P23B
P26B
P31B
190
220
275
260
300
350
4
4
4
P3500SB
P4000SB
P4500SB
P35B
P40B
P45B
320
360
400
400
460
540
4
4
4
P5000SB
P50B
440
600
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional.
4
IS IT
mA max
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
A max
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
IH
mA min
50
50
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
C0
@1MHz
pF min pF max
25 150
15 140
40 60
35 60
25 55
30 50
25 45
25 40
25 35
20 35
25 35
20 35
20 35
20 35
20 35
20 35
20 35
Surge Ratings
Series
B
2/10μS1
2/10μS2
A min
250
Notes:
1. Current waveform in µs
2. Voltage waveform in µs
8/20μS1
1.2/50μS2
A min
250
10/160μS1
10/160μS2
A min
150
10/560μS1
10/560μS2
A min
100
10/1000μS1
10/1000μS2
A min
80
5/310μS1
10/700μS2
A min
100
ITSM
50/60 Hz
A min
30
di/dt
Amps/µs max
500
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPP ratings applicable over temperature range of -40ºC to +85ºC
- The device must initially be in thermal equilibrium with -40°C < TJ < +150°C
Thermal Considerations
Package
DO-214AA
Symbol
TJ
TS
RθJA
Parameter
Value
Operating Junction Temperature Range - 40 to + 150
Storage Temperature Range
- 40 to +150
Thermal Resistance: Junction to Ambient
90
Unit
°C
°C
°C/W
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
2/5
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.



No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080SB - P5000SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Characteristic Curves
Figure 1 - V-I Characteristics
Figure 2 - tr × td Pulse Waveform
+I
IT
IS
IH
IDRM
-V
+V
VT VDRM
VS
-I
tr=rise time to peak value
td=decay time to half value
100 Peak
Value
Waveform=tr×td
50 Half Value
50
tr
0
td
t Time (μs)
Figure 3 - Normalized VS Change Versus Junction
Temperature
Figure 4 - Normalized DC Holding Current Versus Case
Temperature
14
12
10
8
6
4
2
9
-4
-6
-8
-40 -20 0
25
20 40
60 80 100 120 140 160
Junction Temperature (TJ) -
2.0
1.8
1.6
1.4 25
1.2
1.0
0.8
0.6
0.4
-40 -20
0 20 40 60 80 100 120 140 160
Case Temperature (TC) -
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
3/5
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.



No Preview Available !

Thyristor Surge Suppressors (TSS)
P0080SB - P5000SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Environmental Specifications
High Temp Voltage
Blocking
Temp Cycling
Biased Temp &
Humidity
High Temp Storage
Low Temp Storage
Thermal Shock
Autoclave (Pressure
Cooker Test)
Resistance to Solder
Heat
Moisture Sensitivity
Level
80% Rated VDRM (VAC Peak ) +125°C or +150°C,
Lead Material Copper Alloy High Temp Voltage
Blocking 504 or 1008 hrs. MIL-STD-750 (Method
1040) JEDEC, JESD22-A-101
-65°C to +150°C, 15 min. dwell, 10 up to 100 cycles.
MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/
JEDEC, JESD22-A-101
+150°C 1008 hrs. MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
-65°C, 1008 hrs.
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
Thermal Shock 10 cycles. MIL-STD-750 (Method
1056) JEDEC, JESD22-A-106
+121°C, 100%RH, 2atm, 24 up to 168 hrs.
EIA/Cooker Test) JEDEC, JESD22-A-102
+260°C, 30 secs. MIL-STD-750 (Method 2031
85%RH, +85°C, 168 hrs., 3 reflow cycles Level
(+260°C Peak). JEDEC-J-STD-020, Level 1
Soldering Parameters
Physical Specifications
Lead Material
Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
Time to peak temperature
(t 25to peak)
Critical Zone
TL to TP
Ramp-down
Time
Reflow Condition
Leadfree assembly
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max (Ts(max))
+150°C
+200°C
-Time (min to max) (ts)
60 -180 Seconds
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/Second Max
TS(max) to TL - Ramp-up Rate
3°C/Second Max
Reflow
- Temperature (TL) (Liquidus) +217°C
- Time (min to max) (ts)
60 -150 Seconds
Peak Temperature (TP)
260 +0/-5°C
Time within 5°C of actual peak Temperature
30 Seconds Max
(tp)
Ramp-down Rate
6°C/Second Max
Time 25°C to peak Temperature (TP)
Do not exceed
8 minutes Max
+260°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
4/5
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.



P0080SB datasheet pdf
Download PDF
P0080SB pdf
View PDF for Mobile


Related : Start with P0080S Part Numbers by
P0080S SIDACtor Device P0080S
Teccor Electronics
P0080S pdf
P0080SA PROTECTION THYRISTORS P0080SA
MEI SEMI
P0080SA pdf
P0080SA Transient Voltage Suppressors P0080SA
RUILON
P0080SA pdf
P0080SA Thyristor Surge Suppressors P0080SA
Brightking
P0080SA pdf
P0080SB Thyristors P0080SB
JIEJIE
P0080SB pdf
P0080SB PROTECTION THYRISTORS P0080SB
MEI SEMI
P0080SB pdf
P0080SB Transient Voltage Suppressors P0080SB
RUILON
P0080SB pdf
P0080SB Thyristor Surge Suppressors P0080SB
Brightking
P0080SB pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact