OB2283 Datasheet PDF - On-Bright Electronics

www.Datasheet-PDF.com

OB2283
On-Bright Electronics

Part Number OB2283
Description High Performance Current Mode PWM Controller
Page 11 Pages


OB2283 datasheet pdf
Download PDF for PC
OB2283 pdf
View PDF for Mobile


No Preview Available !

OB2283
High Performance Current Mode PWM Controller
GENERAL DESCRIPTION
OB2283 is a highly integrated current mode PWM
control IC optimized for high performance, low
standby power and cost effective offline flyback
converter applications.
PWM switching frequency at normal operation is
internally fixed and is trimmed to tight range. At no
load or light load condition, the IC operates in
extended ‘burst mode’ to minimize switching loss.
Lower standby power and higher conversion
efficiency is thus achieved.
VCC low startup current and low operating current
contribute to a reliable power on startup and low
standby design with OB2283.
OB2283 offers comprehensive protection
coverage with auto-recovery including Cycle-by-
Cycle current limiting (OCP), over load protection
(OLP), and VCC under voltage lockout (UVLO). It
also provides the protections with latched shut
down including over temperature protection (OTP),
and over voltage protection (OVP). Excellent EMI
performance is achieved with On-Bright
proprietary frequency shuffling technique.
The tone energy at below 25KHz is minimized in
the design and audio noise is eliminated during
operation.
OB2283 is offered in SOT23-6 package.
APPLICATIONS
Offline AC/DC flyback converter for
Printer, Storage power supply
Power Adapter
FEATURES
Power on soft start reducing MOSFET Vds
stress
Frequency shuffling for EMI
Extended burst mode control for improved
efficiency and low standby power design
Audio noise free operation
Peak load operation with increased frequency
Comprehensive protection coverage
o VCC Under Voltage Lockout with
hysteresis (UVLO)
o VCC Over Voltage Protection (VCC OVP)
o Cycle-by-cycle over current threshold
setting for constant output power limiting
over universal input voltage range
o Over Load Protection (OLP) with auto-
recovery
o External (if NTC resistor is connected at
PRT pin)or internal Over Temperature
Protection (OTP) with latched shut down
o Output Over Voltage Protection(Output
OVP) with latched shut down, and the
OVP triggered voltage can be adjusted by
the resistor connected between auxiliary
winding and PRT pin
o Output diode short protection with auto-
recovery
o GND open protection with auto-recovery
TYPICAL APPLICATION
AC IN
EMI
Filter
OB2283
6 FB VCC 1
5 PRT
CS 2
4 GND GATE 3
Vaux
DC
Out
©On-Bright Electronics
Confidential
-1-
Preliminary Datasheet
OB_DOC_DS_228300

OB2283 datasheet pdf
Download PDF for PC
OB2283 pdf
View PDF for Mobile


Related : Start with OB228 Part Numbers by
OB2283 High Performance Current Mode PWM Controller OB2283
On-Bright Electronics
OB2283 pdf
OB2287 High Performance Current Mode PWM Controller OB2287
On-Bright Electronics
OB2287 pdf
OB2288 Highly Integrated Current Mode PWM Controller OB2288
On-Bright Electronics
OB2288 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   NEW   

Since 2010   ::   HOME   ::   Contact