NJU7026 Datasheet PDF - NJR


www.Datasheet-PDF.com

NJU7026
NJR

Part Number NJU7026
Description Rail-to-Rail Output CMOS Operational Amplifier
Page 15 Pages

NJU7026 datasheet pdf
View PDF for PC
NJU7026 pdf
View PDF for Mobile


No Preview Available !

NJU7026/NJU7027/NJU7028
13μA/ch, Rail-to-Rail Output CMOS Operational Amplifier
FEATURES (V+=5V, V-=0V, Ta=25°C, typ.)
Supply Current (All Amplifiers)
NJU7026
13µA
NJU7027
26µA
NJU7028
48µA
Supply Voltage
1.8V to 5.5V
Gain Bandwidth Product
160kHz
Rail-to-Rail Output
RL=100kΩ to V+/2
Ground Sense
50mV from rail
Common-Mode Input Voltage Range 0V to 4.1V
Input Offset Voltage
4mV max.
Input Offset Voltage Drift
1.5µV/°C
Thin and Ultra Small Package
ESON8-U1
2.0 x 2.0 x 0.4 mm
RF noise Immunity
Unity-Gain Stable
Package
NJU7026
SOT-23-5, SC-88A
NJU7027
MSOP8 (TVSP8)*
*meet JEDEC MO-187-DA / thin type
DFN8-U1(ESON8-U1)
NJU7028
SSOP14
APPLICATIONS
Battery-powered instruments
Current sensor amplifiers
Voltage/current monitoring
Power line monitoring
Photodiode amplifiers
DESCRIPTION
The NJU7026/NJU7027/NJU7028 are single, dual
and quad rail-to-rail output single supply CMOS
operational amplifiers featuring low supply current.
These amplifiers operates from single 1.8V to 5.5V
supply or dual ±0.9V to ±2.75V supply and provide a
160kHz gain-bandwidth products while using only 13μA
of supply current per channel, ideal for 2-cell battery
systems and 1-cell li-ion battery systems.
NJU7026/NJU7027/NJU7028 have rail-to-rail outputs
that typically swing to within 50mV of the rails with
100kΩ load and the input common mode voltage range
includes negative supply rail and swing to within 0.9V of
the positive rail. These characteristics make them
suited for low-side current sense applications.
In addition to low power and rail-to-rail output, very
low bias current make them to used for photodiode
amplifiers, charge amplifiers, piezoelectric sensors and
other applications with high source impedance.
NJU7026/NJU7027/NJU7028 are high RF-immunity
to reduce malfunctions caused by RF noises from
mobile phones and others.
The NJU7026 is available in 5-pin SC-88A and
SOT-23 package. NJU7027 is available in 8-pin MSOP
(TVSP): meet JEDEC MO-187-DA / thin type package
and DFN which is thin and 2mm square small package.
NJU7028 is available in 14-pin SSOP package.
RELATED PRODUCTS
Features
Single
Dual
Quad
0.23µA/ch, Rail-to-rail I/O
(Ultralow power type)
NJU77001 NJU77002 NJU77004
NJU77000
15nV/√Hz, Rail-to-rail Output NJU7056 NJU7057 NJU7058
(Low Noise type)
9V/µs, 5MHz, Rail-to-rail I/O NJU7046 NJU7047 NJU7048
(High slew rate type)
Ver.03
[1]



No Preview Available !

NJU7026/NJU7027/NJU7028
PIN CONFIGURATION / PRODUCT INFORMATION
Pin
Function
(Top View)
+INPUT 1
5 V+
V- 2
-INPUT 3
4 OUTPUT
(Top View)
A OUTPUT 1
8 V+
(Top View)
A OUTPUT 1
8 V+
A -INPUT 2
A +INPUT 3
V- 4
7 B OUTPUT A -INPUT 2
6 B -INPUT A +INPUT 3
5 B +INPUT
V- 4
Exposed
Pad on
Underside
7 B OUTPUT
6 B -INPUT
5 B +INPUT
Connect to exposed pad to V-
Package
Product
Name
SC-88A
NJU7026F3
SOT-23-5
NJU7026F
MSOP8(TVSP8)
NJU7027RB1
DFN8-U1(ESON8-U1)
NJU7027KU1
Pin
Function
A OUTPUT 1
A -INPUT 2
A +INPUT 3
V+ 4
B +INPUT 5
B -INPUT 6
B OUTPUT 7
(Top View)
14 D OUTPUT
13 D -INPUT
12 D +INPUT
11 V-
10 C +INPUT
9 C -INPUT
8 C OUTPUT
Package
Product
Name
SSOP14
NJU7028V
Ver.03
[2]



No Preview Available !

NJU7026/NJU7027/NJU7028
ABSOLUTE MAXIMUM RATINGS (Ta=25°C, unless otherwise noted.)
PARAMETER
SYMBOL
RATING
UNIT
Supply Voltage
Input Voltage
Differential Input Voltage (1)
Input Current (3)
Power Dissipation (4)
V+ - V-
VIN
VID
IIN
7
V- - 0.3 to V+ + 0.3
±7 (2)
10
(2-layer / 4-layer)(5)
V
V
V
mA
SOT-23-5
480 / 650
SC-88A
360 / 490
MSOP8(TVSP8)
PD
510 / 680
mW
SSOP14
DFN8-U1(ESON8-U1)
500 / 620
450(6) / 1200(6)
Operating Temperature Range
Topr
-40 to +125
°C
Storage Temperature Range
Tstg
-55 to +150
°C
(1) Differential voltage is the voltage difference between +INPUT and -INPUT.
(2) For supply voltage less than +7V, the absolute maximum rating is equal to the supply voltage.
(3) Input voltages outside the supply voltage will be clamped by ESD protection diodes. If the input voltage exceeds the supply
voltage, the input current must be limited 10 mA or less by using a restriction resistance.
(4) Power dissipation is the power that can be consumed by the IC at Ta=25°C, and is the typical measured value based on
JEDEC condition. When using the IC over Ta=25°C subtract the value [mW/°C]=PD/(Tstg(MAX)-25) per temperature.
(5) 2-layer: EIA/JEDEC STANDARD Test board (76.2x114.3x1.6mm, 2layers, FR-4) mounting
4-layer: EIA/JEDEC STANDARD Test board (76.2x114.3x1.6mm, 4layers, FR-4) mounting
(6) 2-layer: EIA/JEDEC STANDARD Test board (101.5x114.5x1.6mm, 2layers, FR-4) mounting
4-layer: EIA/JEDEC STANDARD Test board (101.5x114.5x1.6mm, 4layers, FR-4) mounting
Power Dissipation vs. Temperature
700
2-Layer
600
500
400
MSOP8(TVSP8)
SSOP14
300
200
100
SOT-23-5
DFN8-U1(ESON8-U1)
SC-88A
0
0 25 50 75 100 125
Ambient Temperature [ºC]
150
1300
Power Dissipation vs. Temperature
4-Layer
1200
1100
1000
900
800
MSOP8(TVSP8)
DFN8-U1(ESON8-U1)
700
SOT-23-5
600
500
400
300
200
SSOP14
100
SC-88A
0
0 25 50 75 100 125
Ambient Temperature [ºC]
150
RECOMMENDED OPERATING CONDITIONS (Ta=25°C)
PARAMETER
CONDITION
Supply Voltage
MIN.
1.8
TYP.
-
MAX.
5.5
UNIT
V
Ver.03
[3]



No Preview Available !

NJU7026/NJU7027/NJU7028
ELECTRICAL CHARACTERISTICS (V+=5V, V-=0V, Ta=25°C, unless otherwise noted.)
PARAMETER
SYMBOL
TEST CONDITION
MIN. TYP. MAX.
DC CHARACTERISTICS
Supply Current (All Amplifiers)
NJU7026
NJU7027
ISUPPLY
No Signal
- 13 20
- 26 40
NJU7028
Input Offset Voltage
Input Offset Voltage Drift
NJU7026/NJU7027
NJU7028
VIO
ΔVIO/ΔT
VCOM= 0V, RS=50Ω
Ta = -40°C to 125°C
- 48 72
- 0.9 4
- 1.5 -
-2-
Input Bias Current
Input Offset Current
Open-Loop Voltage Gain
Common-Mode Rejection Ratio
Supply Voltage Rejection Ratio
Common-Mode Input Voltage
Range
High-level Output Voltage
Low-level Output Voltage
AC CHARACTERISTICS
IB
IIO
AV
CMR
SVR
VICM
VOH
VOL
RL=100kΩ to 2.5V, Vout=0.5V to 4.5V
VICM=0V to 4.1V
V+=1.8V to 5.5V
CMR≥65dB
RL=100kΩ to 2.5V
RL=100kΩ to 0V
ISOURCE=1mA
RL=100kΩ to 2.5V
RL=100kΩ to 0V
ISINK=1mA
-
-
70
65
70
0
4.9
4.9
4.8
-
-
-
1-
1-
90 -
80 -
90 -
- 4.1
4.95 -
4.95 -
4.85 -
0.05 0.1
0.02 0.05
0.15 0.2
Slew Rate(7)
SR
GV=0dB, RL=100kΩ to 2.5V,
CL=20pF, VIN=3VPP
Gain Bandwidth Product
GBW RL=100kΩ to 2.5V, CL=20pF, f=10kHz
Full Power Bandwidth
FPBW
GV=6dB, RF=RG=50kΩ, CL=20pF,
VIN=2.5VPP, Vout4.8VPP
Phase Margin
ΦM RL=100kΩ to 2.5V, CL=20pF
Gain Margin
GM RL=100kΩ to 2.5V, CL=20pF
Equivalent Input Noise Voltage
VNI f=1kHz
Total Harmonic Distortion + Noise
THD+N
GV=6dB, RF=RG=50kΩ, CL=20pF,
VO=4VPP, f=100Hz
Channel Separation
CS f=1kHz, NJU7027/NJU7028
(7) Slew rate is defined by the lower value of the rise or fall.
-
-
-
-
-
-
-
-
0.05
160
5
80
15
50
0.01
120
-
-
-
-
-
-
-
-
UNIT
μA
μA
μA
mV
µV/°C
µV/°C
pA
pA
dB
dB
dB
V
V
V
V
V
V
V
V/µs
kHz
kHz
deg
dB
nV/Hz
%
dB
Ver.03
[4]




NJU7026 datasheet pdf
Download PDF
NJU7026 pdf
View PDF for Mobile


Similiar Datasheets : NJU7001 NJU7002 NJU7004 NJU7006 NJU7007 NJU7008 NJU7009 NJU7011 NJU7012 NJU7013 NJU7014 NJU7015 NJU7016 NJU7017 NJU7018 NJU7019 NJU7021 NJU7022 NJU7024 NJU7026 NJU7027 NJU7028 NJU7029 NJU7031 NJU7032 NJU7034 NJU7036 NJU7040 NJU7042 NJU7043

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact