NHSG017HT Datasheet PDF - NICHIA CORPORATION

www.Datasheet-PDF.com

NHSG017HT
NICHIA CORPORATION

Part Number NHSG017HT
Description AMBER LED
Page 13 Pages


NHSG017HT datasheet pdf
Download PDF
NHSG017HT pdf
View PDF for Mobile


No Preview Available !

No. STSE-CC6120A
<Cat.No.061023>
www.DataSheet4U.com
SPECIFICATIONS FOR NICHIA CHIP TYPE GREEN LED
MODEL : NHSG017HT
NICHIA CORPORATION
-0-



No Preview Available !

Nichia STSE-CC6120A
<Cat.No.061023>
1.SPECIFICATIONS
(1) Absolute Maximum Ratings
Item
Forward Current
Pulse Forward Current
Allowable Reverse Current
Power Dissipation
Operating Temperature
www.DataSheeSt4tUo.croamge Temperature
Soldering Temperature
Symbol
IF
IFP
IR
PD
Topr
Tstg
Tsld
IFP Conditions : Pulse Width <= 10msec.
Absolute Maximum Rating
10
30
85
36
-40 ~ +100
-40 ~ +100
Reflow Soldering : 260°C
Dip Soldering : 260°C
Hand Soldering : 350°C
and Duty <= 1/10
(Ta=25°C)
Unit
mA
mA
mA
mW
°C
°C
for 10sec.
for 10sec.
for 3sec.
(2) Initial Electrical/Optical Characteristics
Item Symbol
Forward Voltage
VF
Luminous Intensity
Iv
x
Chromaticity Coordinate
y
-
-
Please refer to CIE 1931 chromaticity diagram.
Condition
IF=5[mA]
IF=5[mA]
IF=5[mA]
IF=5[mA]
(3) Ranking
Item Symbol Condition
Rank R Iv IF=5[mA]
Luminous Intensity Rank Q Iv IF=5[mA]
Rank P Iv IF=5[mA]
Luminous Intensity Measurement allowance is ± 10%.
Typ.
(3.1)
(115)
0.17
0.70
Min.
140
98
70
(Ta=25°C)
Max. Unit
3.6 V
- mcd
--
--
(Ta=25°C)
Max. Unit
195 mcd
140 mcd
98 mcd
Color Ranks
(IF=5mA,Ta=25°C)
Rank G
Rank H
x 0.14 0.14 0.22 0.22
x 0.21 0.21 0.28 0.28
y 0.64 0.74 0.74 0.64
y 0.65 0.73 0.73 0.65
Color Coordinates Measurement allowance is ± 0.01.
One delivery will include up to two color ranks and three luminous intensity ranks of the products.
The quantity-ratio of the ranks is decided by Nichia.
-1-



No Preview Available !

Nichia STSE-CC6120A
<Cat.No.061023>
2.INITIAL OPTICAL/ELECTRICAL CHARACTERISTICS
Please refer to figure’s page.
3.OUTLINE DIMENSIONS AND MATERIALS
Please refer to figure’s page.
Material as follows ;
Package
: Heat-Resistant Polymer
Encapsulating Resin : Epoxy Resin (with Diffused)
Electrodes
: Ag Plating Copper Alloy
www.DataSheet4U.com
4.PACKAGING
· The LEDs are packed in cardboard boxes after taping.
Please refer to figure’s page.
The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity
· In order to protect the LEDs from mechanical shock, we pack them in cardboard boxes for transportation.
· The LEDs may be damaged if the boxes are dropped or receive a strong impact against them,
so precautions must be taken to prevent any damage.
· The boxes are not water resistant and therefore must be kept away from water and moisture.
· When the LEDs are transported, we recommend that you use the same packing method as Nichia.
5.LOT NUMBER
The first six digits number shows lot number.
The lot number is composed of the following characters;
-U
- Year ( 5 for 2005, 6 for 2006 )
- Month ( 1 for Jan., 9 for Sep., A for Oct.,
- Nichia's Product Number
U - Ranking by Color Coordinates
- Ranking by Luminous Intensity
B for Nov. )
-2-



No Preview Available !

6.RELIABILITY
(1) TEST ITEMS AND RESULTS
Test Item
Resistance to
Soldering Heat
(Dip Soldering)
Solderability
(Dip Soldering)
Resistance to
Soldering Heat
(Reflow Soldering)
www.DataSheSeot4ldUe.rcaobmility
(Reflow Soldering)
Standard
Test Method
JEITA ED-4701
300 301
JEITA ED-4701
300 303
JEITA ED-4701
300 301
JEITA ED-4701
300 303
Thermal Shock
JEITA ED-4701
300 307
Temperature Cycle
Moisture Resistance Cyclic
High Temperature Storage
Temperature Humidity
Storage
Low Temperature Storage
Steady State Operating Life
JEITA ED-4701
100 105
JEITA ED-4701
200 203
JEITA ED-4701
200 201
JEITA ED-4701
100 103
JEITA ED-4701
200 202
Nichia STSE-CC6120A
<Cat.No.061023>
Test Conditions
Tsld=260°C, 10sec.
(Pre treatment 30°C,70%,168hrs.)
Tsld=235 ± 5°C, 2sec.
(using flux)
Tsld=260°C, 10sec.
(Pre treatment 30°C,70%,168hrs.)
Tsld=215 ± 5°C, 3sec.
(using flux, Lead Solder)
-40°C ~ 100°C
1min. (10sec.) 1min.
(Pre treatment 30°C,70%,168hrs.)
-40°C ~ 25°C ~ 100°C ~ 25°C
30min. 5min. 30min. 5min.
25°C ~ 65°C ~ -10°C
90%RH 24hrs./1cycle
Ta=100°C
Ta=60°C, RH=90%
Ta=-40°C
Ta=25°C, IF=10mA
Note
1 time
Number of
Damaged
0/22
1 time
over 95%
2 times
0/22
0/22
1 time
over 95%
100 cycles
0/22
0/100
100 cycles
10 cycles
1000 hrs.
1000 hrs.
1000 hrs.
1000 hrs.
0/100
0/100
0/100
0/100
0/100
0/100
Steady State Operating Life
of High Temperature
Steady State Operating Life
of High Humidity Heat
Steady State Operating Life
of Low Temperature
Permanence of Marking
Vibration
Drop
Electrostatic Discharge
JEITA ED-4701
500 501
JEITA ED-4701
400 403
JEITA ED-4701
300 304
Ta=85°C, IF=10mA
60°C, RH=90%, IF=10mA
Ta=-40°C, IF=5mA
Solvent : Isopropyl Alcohol
Solvent Temperature : 20 ~ 25°C
Dipping Time : 5 min.
100 ~ 2000 ~ 100Hz Sweep 4min.
200m/s2
3direction, 4cycles
75cm
R=1.5k, C=100pF
Test Voltage=2kV
1000 hrs.
1000 hrs.
1000 hrs.
1 time
48min.
3 times
3 times
Negative/Positive
(2) CRITERIA FOR JUDGING DAMAGE
Item
Symbol
Test Conditions
Criteria for Judgement
Min.
Max.
Forward Voltage
Luminous Intensity
Condition 1
Luminous Intensity
Condition 2
VF IF=5mA
IV IF=5mA
IV IF=5mA
-
L.S.L.**) 0.7
L.S.L.**) 0.5
U.S.L.*) 1.1
-
-
*) U.S.L. : Upper Standard Level
**) L.S.L. : Lower Standard Level
These test items are judged by the criteria of Luminous Intensity Condition 2.
-3-
0/100
0/100
0/100
0/22
0/10
0/10
0/22



NHSG017HT datasheet pdf
Download PDF
NHSG017HT pdf
View PDF for Mobile


Related : Start with NHSG017H Part Numbers by
NHSG017HT AMBER LED NHSG017HT
NICHIA CORPORATION
NHSG017HT pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact