NC406 Datasheet PDF - Noise Com


www.Datasheet-PDF.com

NC406
Noise Com

Part Number NC406
Description (NC400 Series) UHF/Microwave Mixer Diode
Page 2 Pages

NC406 datasheet pdf
View PDF for PC
NC406 pdf
View PDF for Mobile


No Preview Available !

www.DataSheet4U.com
0.1 Hz to 110 GHz
30
NOISE
DIODES
General Specifications:
Output
White Gaussian Noise
Operating
0˚C to +55˚C
temperature
for NC100 series
-55˚C to +125˚C
for all others
Storage temperature -65˚C to +150˚C
Specifications subject to change without notice.
Noise Com's noise diodes are the fundamental
building blocks of all noise systems. They are
hand-picked for performance characteristics that
make them ideally suited to broadband noise
generation with flat response.
All Noise Com noise diodes deliver symmetrical
white Gaussian noise and flat output power
versus frequency. The diodes are burned-in
for 168 hours, meet MIL-STD202, and are
hermetically sealed. Noise Com noise diodes
are available in a wide variety of package styles,
and in special configurations on request.
The NC100 and NC200 Series diodes are
designed for audio and RF applications. The
NC300 and NC400 Series diodes are designed
for microwave applications in which
a 50-ohm impedance is required.
Typical small signal impedance of the NC300
and NC400 Series is 10-20 ohms when a diode
is turned on. Typically the output
level is higher at low frequencies
with low currents. Driving the
diodes with more current results in more output
at higher frequencies.
Applications:
Built-in test equipment (BITE)
Dither circuitry for A/D converters
+
15V
TYPICAL BIAS CIRCUIT
CATHODE
R
C
RF
For NC100 Series
R = 150K
For NC200 Series
R = 15K
RL For NC300/400 Series
R = Adjust for performance
C
1
2πRL(fc)
R L= Load resistor
For recommended value,
see charts on page 31
fc= low frequency cut-off
DataSheet4 U .com
www.noisecom.com



No Preview Available !

www.DataSheet4U.com
CH1 Chip (inches)
31
CH2 Chip (inches)
CH3 Chip (inches)
C10 (inches)
C50 (inches)
C50H (inches)
DO-35 Package (inches)
BL Package (inches)
AUDIO & VHF TYPES
MODEL
NC101
FREQUENCY
RANGE
0.1 Hz - 100 kHz
OPERATING CONDITIONS MINIMUM OUTPUT
Vb (V) Iop
RL ()
(µV/Hz)
7 - 10 30 - 60 µA 2200
3.0
PACKAGE
DO-35
NC102 0.1 Hz - 500 kHz 7 - 10 30 - 60 µA 2200
3.0
DO-35
NC103 0.1 Hz - 1 MHz
7 - 10 30 - 60 µA 2200
3.0
DO-35
NC104 0.1 Hz - 3 MHz
7 - 10 30 - 60 µA 2200
3.0
DO-35
NC201 0.1 Hz - 10 MHz 7 - 10 0.2 - 0.5 mA 2200
0.1
DO-35
NC202
NC203
0.1 Hz - 25 MHz
0.1 Hz - 100 MHz
7 - 10 0.2 - 0.5 mA
7 - 10 0.2 - 0.5 mA
2200
50
0.1
0.05
DO-35
DO-35
MODEL
NC302L
NC303
NC305
NC401
NC403
NC404
NC405
NC406
RF & MICROWAVE TYPES
FREQUENCY
RANGE
10 Hz - 3 GHz
OPERATING CONDITIONS
Vb (V) Iop(mA) RL ()
6-8 6
50
OUTPUT
ENR (dB)
30 - 35
10 Hz - 8 GHz
8 - 12 8
50
30 - 35
10 MHz - 11 GHz
100 MHz - 18 GHz
100 MHz - 27 GHz
18 GHz - 50 GHz
18 GHz - 75 GHz
18 GHz - 110 GHz
8 - 12
8 - 12
8 - 12
8 - 12
8 - 12
8 - 12
10
10
12
15
20
25
50
50
50
50
50
50
29 - 34
30 - 35
24 - 28
20 - 25
15 - 25
15 - 25
1. For chip configuration, add suffix “C”.
2. For beam lead configuration, add suffix “BL”.
3. For C50H configuration, add suffix “H”.
PACKAGE
DO-35 BL CH1
DO-35 BL CH1
BL CH1
C10 C50H CH2
C50 CH3
C50 CH3
C50 CH3
C50 CH3
DataSheet4 U .com
To order call 201-261-8797




NC406 datasheet pdf
Download PDF
NC406 pdf
View PDF for Mobile


Similiar Datasheets : NC401 NC401 NC4016 NC401C NC403 NC403 NC404 NC404 NC405 NC405 NC406 NC406 NC41120-0015 NC41120-0017 NC41120-0018 NC4D-DC110V NC4D-DC12V NC4D-DC24V NC4D-DC48V NC4D-DC5V NC4D-DC6V NC4D-JP-DC110V NC4D-JP-DC12V NC4D-JP-DC24V NC4D-JP-DC48V NC4D-JP-DC5V NC4D-JP-DC6V NC4D-JPL2-DC110V NC4D-JPL2-DC12V NC4D-JPL2-DC24V

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact