MURA210T3 Datasheet PDF - ON Semiconductor

www.Datasheet-PDF.com

MURA210T3
ON Semiconductor

Part Number MURA210T3
Description (MURA205T3 / MURA210T3) Surface Mount Ultrafast Power Rectifiers
Page 4 Pages


MURA210T3 datasheet pdf
View PDF for PC
MURA210T3 pdf
View PDF for Mobile


No Preview Available !

www.DataSheet4U.com
MURA205T3, MURA210T3
Preferred Devices
Surface Mount
Ultrafast Power Rectifiers
Ideally suited for high voltage, high frequency rectification, or as
free wheeling and protection diodes in surface mount applications
where compact size and weight are critical to the system.
Small Compact Surface Mountable Package with J-Bend Leads
Rectangular Package for Automated Handling
High Temperature Glass Passivated Junction
Low Forward Voltage Drop (0.74 Volts Max @ 2.0 A, TJ = 150°C)
Mechanical Characteristics:
Case: Epoxy, Molded
Weight: 70 mg (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
Shipped in 12 mm Tape and Reel, 5000 units per reel
Polarity: Polarity Band Indicates Cathode Lead
ESD Protection: Human Body Model > 4000 V (Class 3)
ESD Protection: Machine Model > 400 V (Class C)
Marking: U5A, U5B
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
MURA205T3
MURA210T3
Average Rectified Forward Current
@ TL = 155°C
@ TL = 135°C
Non-Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
Operating Junction Temperature Range
Symbol
VRRM
VRWM
VR
IF(AV)
IFSM
TJ
Value
50
100
1.0
2.0
50
- 65 to
+175
Unit
V
A
A
°C
http://onsemi.com
ULTRAFAST RECTIFIERS
2 AMPERES
50-100 VOLTS
SMA
CASE 403D
PLASTIC
MARKING
DIAGRAM
U5x
x = A (205T3)
B (210T3)
ORDERING INFORMATION
Device
Package
Shipping
MURA205T3
SMA
5000/Tape & Reel
MURA210T3
SMA
5000/Tape & Reel
Preferred devices are recommended choices for future use
and best overall value.
© Semiconductor Components Industries, LLC, 2003
January, 2003 - Rev. 2
1
Publication Order Number:
MURA205T3/D



No Preview Available !

MURA205T3, MURA210T3
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Thermal Resistance, Junction to Lead (Note 1)
Thermal Resistance, Junction to Ambient (Note 1)
PsiJL
(Note 2)
RθJA
24
216
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 3)
(iF = 2.0 A, TJ = 25°C)
(iF = 2.0 A, TJ = 150°C)
vF
0.94
0.74
Maximum Instantaneous Reverse Current (Note 3)
(Rated dc Voltage, TJ = 25°C)
(Rated dc Voltage, TJ = 150°C)
iR
2.0
50
Maximum Reverse Recovery Time
(iF = 1.0 A, di/dt = 50 A/µs)
trr 30
1. Rating applies when surface mounted on the minimum pad size recommended, PC Board FR-4.
2. In compliance with JEDEC 51, these values (historically represented by RθJL) are now referenced as PsiJL.
3. Pulse Test: Pulse Width = 300 µs, Duty Cycle v 2.0%.
Unit
°C/W
Volts
µA
ns
100
10
1
0.1
0.01
0.001
0
TJ = 175°C
TJ = 100°C
100
TJ = 175°C
10
TJ = 100°C
TJ = 25°C
20 40 60 80
VR, REVERSE VOLTAGE (VOLTS)
Figure 1. Typical Reverse Current
100
1
0.1
0
TJ = 25°C
20 40 60 80
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Maximum Reverse Current
100
10 10
TC = 175°C
100°C
25°C
11
TC = 175°C
100°C
25°C
0.1 0.1
0.01
0.3 0.4 0.5 0.6 0.7 0.8 0.9
1 1.1
0.01
0.3 0.4 0.5 0.6 0.7 0.8 0.9
1 1.1
VF, INSTANTANEOUS VOLTAGE (VOLTS)
VF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 3. Typical Forward Voltage
Figure 4. Maximum Forward Voltage
http://onsemi.com
2



No Preview Available !

MURA205T3, MURA210T3
50
45
40
35
30
25
20
15
10
5
0
04
NOTE: TYPICAL
CAPACITANCE AT
0 V = 45 pF
8 12 16 20 24 28 32 36 40
VR, REVERSE VOLTAGE (VOLTS)
Figure 5. Typical Capacitance
60
NOTE: MAXIMUM
50 CAPACITANCE AT
0 V = 48 pF
40
30
20
10
0
0 4 8 12 16 20 24 28 32 36 40
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Maximum Capacitance
4
3.5
dc
3
RqJL = 24°C/W
TJ = 175°C
2.5 SQUARE WAVE
2
1.5
1
0.5
0
100 110 120 130 140 150 160 170
TL, LEAD TEMPERATURE (°C)
Figure 7. Current Derating, Lead
180
1.5
dc
1
SQUARE
WAVE
0.5
RqJA = 216°C/W
TJ = 175°C
0
0 20 40 60 80 100 120 140 160
TA, AMBIENT TEMPERATURE (°C)
Figure 8. Current Derating, Ambient
(FR-4 Board with Minimum Pad)
2.5
TJ = 175°C
2
dc
SQUARE WAVE
1.5
1
0.5
0
0 0.5 1 1.5 2 2.5 3 3.5
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 9. Power Dissipation
http://onsemi.com
3



No Preview Available !

MURA205T3, MURA210T3
PACKAGE DIMENSIONS
SMA
CASE 403D-02
ISSUE A
S
A
DB
POLARITY INDICATOR OPTIONAL
AS NEEDED
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 403D−01 OBSOLETE, NEW STANDARD IS
403D−02.
INCHES
DIM MIN MAX
A 0.160 0.180
B 0.090 0.115
C 0.075 0.095
D 0.050 0.064
H 0.002 0.006
J 0.006 0.016
K 0.030 0.060
S 0.190 0.220
MILLIMETERS
MIN MAX
4.06 4.57
2.29 2.92
1.91 2.41
1.27 1.63
0.05 0.15
0.15 0.41
0.76 1.52
4.83 5.59
C
K JH
0.157
4.0
0.0787
2.0
0.0787
2.0
SMA FOOTPRINT
inches
mm
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
N. American Technical Support: 800-282-9855 Toll Free USA/Canada
JAPAN: ON Semiconductor, Japan Customer Focus Center
2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051
Phone: 81-3-5773-3850
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
4
MURA205T3/D



MURA210T3 datasheet pdf
Download PDF
MURA210T3 pdf
View PDF for Mobile


Related : Start with MURA210T Part Numbers by
MURA210T3 (MURA205T3 / MURA210T3) Surface Mount Ultrafast Power Rectifiers MURA210T3
ON Semiconductor
MURA210T3 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact