MAX1071 Datasheet PDF - Maxim Integrated Products

www.Datasheet-PDF.com

MAX1071
Maxim Integrated Products

Part Number MAX1071
Description (MAX1070 / MAX1071) 10-Bit ADCs
Page 18 Pages


MAX1071 datasheet pdf
Download PDF
MAX1071 pdf
View PDF for Mobile


No Preview Available !

19-3292; Rev 0; 5/04
www.DataSheet4U.com
1.5Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
General Description
The MAX1070/MAX1071 low-power, high-speed, serial-
output, 10-bit, analog-to-digital converters (ADCs) oper-
ate at up to 1.5Msps. These devices feature true-differen-
tial inputs, offering better noise immunity, distortion
improvements, and a wider dynamic range over single-
ended inputs. A standard SPI™/QSPI™/MICROWIRE™
interface provides the clock necessary for conversion.
These devices easily interface with standard digital signal
processor (DSP) synchronous serial interfaces.
The MAX1070/MAX1071 operate from a single +2.7V to
+3.6V supply voltage and require an external reference.
The MAX1070 has a unipolar analog input, while the
MAX1071 has a bipolar analog input. These devices fea-
ture a partial power-down mode and a full power-down
mode for use between conversions, which lower the sup-
ply current to 1mA (typ) and 1µA (max), respectively. Also
featured is a separate power-supply input (VL), which
allows direct interfacing to +1.8V to VDD digital logic. The
fast conversion speed, low-power dissipation, excellent
AC performance, and DC accuracy (±0.5 LSB INL) make
the MAX1070/MAX1071 ideal for industrial process con-
trol, motor control, and base-station applications.
The MAX1070/MAX1071 come in a 12-pin TQFN pack-
age, and are available in the commercial (0°C to +70°C)
and extended (-40°C to +85°C) temperature ranges.
Applications
Data Acquisition
Bill Validation
Motor Control
Communications
Portable Instruments
Pin Configuration
Features
1.5Msps Sampling Rate
Only 18mW (typ) Power Dissipation
Only 1µA (max) Shutdown Current
High-Speed, SPI-Compatible, 3-Wire Serial Interface
61dB S/(N + D) at 525kHz Input Frequency
Internal True-Differential Track/Hold (T/H)
External Reference
No Pipeline Delays
Small 12-Pin TQFN Package
PART
MAX1070CTC-T
MAX1070ETC-T
MAX1071CTC-T
MAX1071ETC-T
Ordering Information
TEMP RANGE PIN-
PACKAGE
0°C to +70°C 12 TQFN-12
-40°C to +85°C 12 TQFN-12
0°C to +70°C 12 TQFN-12
-40°C to +85°C 12 TQFN-12
INPUT
Unipolar
Unipolar
Bipolar
Bipolar
Typical Operating Circuit
TOP VIEW
AIN+ N.C. SCLK
12 11 10
AIN- 1
REF 2
RGND 3
MAX1070
MAX1071
9 CNVST
8 DOUT
7 VL
456
VDD N.C. GND
TQFN
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
+2.7V TO +3.6V
+1.8V TO VDD
10µF
DIFFERENTIAL +
INPUT
VOLTAGE -
REF
4.7µF
0.01µF
0.01µF
VDD
0.01µF
VL
AIN+ DOUT
AIN-
MAX1070
MAX1071 CNVST
SCLK
REF
RGND
GND
10µF
µC/DSP
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.



No Preview Available !

www.DataSheet4U.com
1.5Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
VL to GND ................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Inputs
to GND .................-0.3V to the lower of (VDD + 0.3V) and +6V
Digital Output
to GND ....................-0.3V to the lower of (VL + 0.3V) and +6V
Analog Inputs and
REF to GND..........-0.3V to the lower of (VDD + 0.3V) and +6V
RGND to GND .......................................................-0.3V to +0.3V
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
12-Pin TQFN (derate 16.9mW/°C above +70°C) ......1349mW
Operating Temperature Ranges
MAX107_ CTC ...................................................0°C to +70°C
MAX107_ ETC.................................................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +3.6V, VL = VDD, VREF = 2.048V, fSCLK = 24.0MHz, 50% duty cycle, TA = TMIN to TMAX, unless otherwise noted.
Typical values are at VDD = 3V and TA = +25°C.)
PARAMETER
DC ACCURACY
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Resolution
Relative Accuracy
INL (Note 1)
10 Bits
±0.5 LSB
Differential Nonlinearity
Offset Error
DNL (Note 2)
±0.5
±2
LSB
LSB
Offset-Error Temperature
Coefficient
±1 ppm/°C
Gain Error
Offset nulled
±2 LSB
Gain Temperature Coefficient
±2 ppm/°C
DYNAMIC SPECIFICATIONS (fIN = 525kHz sine wave, VIN = VREF, unless otherwise noted.)
Signal-to-Noise Plus Distortion
SINAD
60 61
dB
Total Harmonic Distortion
THD Up to the 5th harmonic
-80 -74
dB
Spurious-Free Dynamic Range
Intermodulation Distortion
Full-Power Bandwidth
Full-Linear Bandwidth
CONVERSION RATE
Minimum Conversion Time
Maximum Throughput Rate
Minimum Throughput Rate
SFDR
IMD
fIN1 = 250kHz, fIN2 = 300kHz
-3dB point
S/(N + D) > 56dB, single ended
tCONV (Note 3)
(Note 4)
-80 -74
dB
-78 dB
15 MHz
2 MHz
0.667
µs
1.5 Msps
10 ksps
Track-and-Hold Acquisition Time
Aperture Delay
tACQ (Note 5)
125 ns
5 ns
Aperture Jitter
External Clock Frequency
fSCLK
(Note 6)
(Note 7)
30 ps
24.0 MHz
2 _______________________________________________________________________________________



No Preview Available !

www.DataSheet4U.com
1.5Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
ELECTRICAL CHARACTERISTICS (continued)
(VDD = +2.7V to +3.6V, VL = VDD, VREF = 2.048V, fSCLK = 24.0MHz, 50% duty cycle, TA = TMIN to TMAX, unless otherwise noted.
Typical values are at VDD = 3V and TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
ANALOG INPUTS (AIN+, AIN-)
Differential Input Voltage Range
Absolute Input Voltage Range
DC Leakage Current
Input Capacitance
Input Current (Average)
REFERENCE INPUT (REF)
AIN+ - AIN-, MAX1070
VIN AIN+ - AIN-, MAX1071
0
-VREF / 2
VREF
+VREF / 2
V
0
VDD
V
±1 µA
Per input pin
16 pF
Time averaged at maximum throughput rate
50
µA
REF Input Voltage Range
VREF
1.0
VDD +
50mV
V
Input Capacitance
DC Leakage Current
Input Current (Average)
DIGITAL INPUTS (SCLK, CNVST)
Input-Voltage Low
Input-Voltage High
Input Leakage Current
DIGITAL OUTPUT (DOUT)
Output Load Capacitance
Output-Voltage Low
Output-Voltage High
Output Leakage Current
POWER REQUIREMENTS
Analog Supply Voltage
Digital Supply Voltage
VIL
VIH
IIL
COUT
VOL
VOH
IOL
VDD
VL
Analog Supply Current,
Normal Mode
IDD
Analog Supply Current,
Partial Power-Down Mode
IDD
Time averaged at maximum throughput rate
20
±1
200
0.7 x VL
0.05
0.3 x VL
±10
For stated timing performance
ISINK = 5mA, VL 1.8V
ISOURCE = 1mA, VL 1.8V
Output high impedance
VL - 0.5V
±0.2
30
0.4
±10
Static, fSCLK = 24.0
Static, no SCLK
Operational, 1.5Msps
fSCLK = 24.0MHz
No SCLK
2.7 3.6
1.8 VDD
57
45
68
1
1
pF
µA
µA
V
V
µA
pF
V
V
µA
V
V
mA
mA
Analog Supply Current,
Full Power-Down Mode
Digital Supply Current (Note 8)
Positive-Supply Rejection
IDD
fSCLK = 24.0MHz
No SCLK
Operational, full-scale input at 1.5Msps
Static, fSCLK = 24.0MHz
Partial/full power-down mode,
fSCLK = 24.0MHz
Static, no SCLK (all modes)
PSR Full-scale input, 3V +20%, -10%
1
0.3
0.3
0.15
0.1
0.1
±0.2
1
1
0.5
0.3
1
±3.0
µA
mA
µA
mV
_______________________________________________________________________________________ 3



No Preview Available !

www.DataSheet4U.com
1.5Msps, Single-Supply, Low-Power,
True-Differential, 10-Bit ADCs
TIMING CHARACTERISTICS
(VDD = +2.7V to +3.6V, VL = VDD, VREF = 2.048V, fSCLK = 24.0MHz, 50% duty cycle, TA = TMIN to TMAX, unless otherwise noted.
Typical values are at VDD = 3V and TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
SCLK Pulse-Width High
VL = 2.7V to VDD
18.7
tCH VL = 1.8V to VDD, minimum recommended
(Note 7)
22.5
ns
SCLK Pulse-Width Low
VL = 2.7V to VDD
18.7
tCL VL = 1.8V to VDD, minimum recommended
(Note 7)
22.5
ns
SCLK Rise to DOUT Transition
DOUT Remains Valid After SCLK
CNVST Fall to SCLK Fall
CNVST Pulse Width
Power-Up Time; Full Power-Down
Restart Time; Partial Power-Down
tDOUT
tDHOLD
tSETUP
tCSW
tPWR-UP
tRCV
CL = 30pF, VL = 2.7V to VDD
CL = 30pF, VL = 1.8V to VDD
VL = 1.8V to VDD
VL = 1.8V to VDD
VL = 1.8V to VDD
17
ns
24
4 ns
10 ns
20 ns
2 ms
16 Cycles
Note 1: Relative accuracy is the deviation of the analog value at any code from its theoretical value after the gain error and the offset
error have been nulled.
Note 2: No missing codes over temperature.
Note 3: Conversion time is defined as the number of clock cycles (16) multiplied by the clock period.
Note 4: At sample rates below 10ksps, the input full-linear bandwidth is reduced to 5kHz.
Note 5: The listed value of three SCLK cycles is given for full-speed continuous conversions. Acquisition time begins on the 14th ris-
ing edge of SCLK and terminates on the next falling edge of CNST. The IC idles in acquisition mode between conversions.
Note 6: Undersampling at the maximum signal bandwidth requires the minimum jitter spec for SINAD performance.
Note 7: 1.5Msps operation guaranteed for VL > 2.7V. See the Typical Operating Characteristics section for recommended sampling
speeds for VL < 2.7V.
Note 8: Digital supply current is measured with the VIH level equal to VL, and the VIL level equal to GND.
CNVST
SCLK
tSETUP
DOUT
tCL tCH
tDHOLD
tDOUT
Figure 1. Detailed Serial-Interface Timing
VL
tCSW
DOUT
6k
DOUT
6kCL
GND
a) HIGH-Z TO VOH, VOL TO VOH,
AND VOH TO HIGH-Z
CL
GND
b) HIGH-Z TO VOL, VOH TO VOL,
AND VOL TO HIGH-Z
Figure 2. Load Circuits for Enable/Disable Times
4 _______________________________________________________________________________________



MAX1071 datasheet pdf
Download PDF
MAX1071 pdf
View PDF for Mobile


Related : Start with MAX107 Part Numbers by
MAX107 Dual / 6-Bit / 400Msps ADC with On-Chip / Wideband Input Amplifier MAX107
Maxim
MAX107 pdf
MAX1070 (MAX1070 / MAX1071) 10-Bit ADCs MAX1070
Maxim Integrated Products
MAX1070 pdf
MAX1071 (MAX1070 / MAX1071) 10-Bit ADCs MAX1071
Maxim Integrated Products
MAX1071 pdf
MAX1072 (MAX1072 / MAX1075) 10-Bit ADCs MAX1072
Maxim Integrated Products
MAX1072 pdf
MAX1075 (MAX1072 / MAX1075) 10-Bit ADCs MAX1075
Maxim Integrated Products
MAX1075 pdf
MAX1076 (MAX1076 / MAX1078) 10-Bit ADCs MAX1076
Maxim Integrated Products
MAX1076 pdf
MAX1078 1.8Msps / Single-Supply / Low Power / True-Differential / 10-Bit ADCs MAX1078
Maxim Integrated
MAX1078 pdf
MAX1078 (MAX1076 / MAX1078) 10-Bit ADCs MAX1078
Maxim Integrated Products
MAX1078 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact