LNJ912W8CRA1 Datasheet PDF - Panasonic

www.Datasheet-PDF.com

LNJ912W8CRA1
Panasonic

Part Number LNJ912W8CRA1
Description Hight Bright Surface Mounting Chip LED
Page 3 Pages


LNJ912W8CRA1 datasheet pdf
View PDF for PC
LNJ912W8CRA1 pdf
View PDF for Mobile


No Preview Available !

LNJ912W8CRA1
Hight Bright Surface Mounting Chip LED
TSS Type
Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol Rating
Unit
Power dissipation
PD 65
Forward current
IF 15
Pulse forward current *
IFP 55
Reverse voltage
VR 5
Operating ambient temperature
Topr –30 to +85
Storage temperature
Tstg –40 to +100
Note) *: The condition of IFP is duty 10%, Pulse width 1 msec.
Electro-Optical Characteristics Ta = 25°C±3°C
mW
mA
mA
V
°C
°C
Parameter
Luminous intensity *1
Reverse current
Forward voltage
Peak emission wavelength
Dominant emission wavelength *2
Spectral half band width
Note) *1: Measurement tolerance: ±20%
*2: Measurement tolerance: ±3 nm
IO IF
102
Symbol
IO IF = 5 mA
IR VR = 5 V
VF IF = 5 mA
λP IF = 5 mA
λd IF = 5 mA
Δλ IF = 5 mA
Conditions
IF VF
102
Lighting Color
Blue
Min Typ Max Unit
5.0 12.0 41.8 mcd
100 µA
2.90 3.20
V
465 nm
462 470 478
nm
20 nm
Relative luminous intensity Ta
103
10 10 102
1
1
10 102
Forward current IF (mA)
1
1 234 5
Forward voltage VF (V)
10
20
0
20 40 60
80 100
Ambient temperature Ta (°C)
Relative luminous intensity  λP
100
Directive characteristics
80
20° 10° 0° 10° 20°
30° 30°
60
40° 80°
40°
50° 50°
40
60°
60° 60°
70° 40° 70°
20
80° 20°
80°
0 90°
90°
400 450 500 550 600 100 80 60 40 20 0 20 40 60 80 100
Peak emission wavelength λP (nm)
Relative luminous intensity (%)
Publication date: December 2016
Ver. DEK
IF Ta
25
20
15
10
5
0 20 0
20 40 60
80 100
Ambient temperature Ta (°C)
1



No Preview Available !

LNJ912W8CRA1
Package (Unit: mm)
2 Ver. DEK



No Preview Available !

Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or improve-
ment. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in
advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or
preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
No.020210



LNJ912W8CRA1 datasheet pdf
Download PDF
LNJ912W8CRA1 pdf
View PDF for Mobile


Related : Start with LNJ912W8CRA Part Numbers by
LNJ912W8CRA1 Hight Bright Surface Mounting Chip LED LNJ912W8CRA1
Panasonic
LNJ912W8CRA1 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact