K1050S Datasheet PDF - JIEJIE


www.Datasheet-PDF.com

K1050S
JIEJIE

Part Number K1050S
Description Sidac
Page 4 Pages

K1050S datasheet pdf
View PDF for PC
K1050S pdf
View PDF for Mobile


No Preview Available !

JIEJIE MICROELECTRONICS CO. , Ltd
K0900S Series Sidac
Rev.1.0
DESCRIPTION:
The sidac is a silicon bilateral voltage triggered switch with greater power-handling
capabilities than standard diacs. Upon application of a voltage exceeding the sidac
breakover voltage point, the sidac switches on through a negative resistance region
to a low on-state voltage. Conduction continues until the current is interrupted or
drops below the minimum holding current of the device.
APPLICATIONS:
High-voltage lamp ignitors
Natural gas ignitors
Gas oil ignitors
High-voltage power supplies
Xenon ignitors
Overvoltage protector
Pulse generators
Fluorescent lighting ignitorsHID lighting ignitors
1
Symbol
2
FEATURES:
Excellent capability of absorbing transient surge
Quick response to surge voltage (ns Level)
Glass-passivated junctions
High voltage lcmp ignitors
ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Storage temperature range
Tstg
Operating junction temperature range
Tj
On-state RMS Current
Maximum surge on-state current
non-repetitive one cycle peak value50Hz
Critical rate-of-rise of on-state current
IT
ITSM
diT/dt
Value
-40 to +125
-40 to +125
1
16.7
80
Unit
A
A
A
TEL:+86-513-83639777
- 1 / 4-
http://www.jjwdz.com



No Preview Available !

K0900S Series
JieJie Microelectronics CO. , Ltd
ELECTRICAL CHARACTERISTICS (TA=25)
Symbol
Parameter
VDRM Peak off-state voltage
IDRM Off-state current
VS Switching voltage
IS Switching current
RS Switching resistance
VT On-state voltage
IH Holding current
VBO Breakover Voltage
IBO Breakover current
V-I Curve
ELECTRICAL CHARACTERISTICS (TA=25, continued)
Part
Number
IDRM@VDRM
μA V
max min
VBO
V
min max
IBO VT@ IT=1A
uA V
max max
K0900S 1
70 80 97 50
2
K1050S 1
90 95 113 50
2
K1200S 1 100 110 125 50
2
K1300S 1 110 120 138 50
2
K1400S 1 120 130 146 50
2
K1500S 1 130 140 170 50
2
K1800S 1 160 170 195 50
2
K2000S 1 180 190 215 50
2
K2200S 1 190 205 230 50
2
K2400S 1 200 220 250 50
2
K2600S 1 220 240 270 50
2
IH
mA
min
10
10
10
10
10
10
10
10
10
10
10
RS
kMarking
min
0.1 K09S
0.1 K10S
0.1 K12S
0.1 K13S
0.1 K14S
0.1 K15S
0.1 K18S
0.1 K20S
0.1 K22S
0.1 K24S
0.1 K26S
TEL:+86-513-83639777
- 2 / 4-
http://www.jjwdz.com



No Preview Available !

K0900S Series
ORDERING INFORMATION
JieJie Microelectronics CO. , Ltd
MARKING
K09S
1409
K09S:Device Marking Code
1409: In ninth week, 2014
SOLDERING PARAMETERS
Reflow Condition
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max(Ts(max))
-Time (Min to Max) (ts)
Average ramp up rate (Liquid us Temp (TL) to peak)
Ts(max) to TL - Ramp-up Rate
Reflow
-Temperature(TL) (Liquid us)
-Temperature(tL)
Peak Temp (Tp)
Time within 5of actual Peak Temp (tp)
Ramp-down Rate
Time 25to Peak Temp (TP)
Do not exceed
Pb-Free assembly
(see FIG.2)
+150
+200
60-180 secs.
3/sec. Max
3/sec. Max
+217
60-150 secs.
+260(+0/-5)
8-15 secs.
6/sec. Max
8 min. Max
+260
TEL:+86-513-83639777
- 3 / 4-
http://www.jjwdz.com



No Preview Available !

K0900S Series
JieJie Microelectronics CO. , Ltd
FIG.1: Maximum allowable ambient temperature
FIG.2: Reflow condition
versus on-state current
TA()
140
120
Current waveform: sinusoidal-50Hz
Load: resistive or inductive
Free air rating
TP
Ramp-up
tp
Critical Zone
TL to TP
TL
100 tL
80
60
DO-214AC(SMA)
TS(max)
Preheat
Ramp-down
TS(min)
40 ts
25
200 0.2 0.4 0.6 0.8 1.0 1.2 1.4
IT(A)
25 time to peak temperatue
(t 25to peak)
Time
FIG.3: Normalized Vs change vs. junction
temperature
Percent of Vs change(%)
12
8
4
25
0
-4
-8 Tj()
-40 -20 0 20 40 60 80 100 120 140 160
FIG.4: Normalized DC holding current vs. case
temperature
IH(Tj)/IH(Tj=25)
2.0
1.8
1.6
1.4
1.2 25
1.0
0.8
0.6
0.4 TC ()
-40 -20 0 20 40 60 80 100 120 140 160
TAPE AND REEL SPECIFICATION
PACKAGE
DO214AC/SMA
DO214AA/SMB
REEL
(PCS)
5,000
3,000
PER CARTON
(PCS)
80,000
48,000
REEL DIAMETERS
(mm)
330
330
Information furnished in this document is believed to be accurate and reliable.
However, Jiangsu JieJie Microelectronics Co.,Ltd assumes no responsibility for the
consequences of use without consideration for such information nor use beyond it.
Information mentioned in this document is subject to change without notice, apart
from that when an agreement is signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents.
Jiangsu JieJie assumes no responsibility for any infringement of other rights of third
parties which may result from the use of such products and information.
This document is the first version which is made in 23-May.-2015. This document
supersedes and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co.,Ltd.
Copyright ©2015 Jiangsu JieJie Microelectronics Co.,Ltd. Printed All rights reserved.
TEL:+86-513-83639777
- 4 / 4-
http://www.jjwdz.com




K1050S datasheet pdf
Download PDF
K1050S pdf
View PDF for Mobile


Similiar Datasheets : K105 K1050G K1050S K1050y K1052 K1053 K1056 K1057 K1058

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact