IRSM807-045MH Datasheet PDF - International Rectifier

www.Datasheet-PDF.com

IRSM807-045MH
International Rectifier

Part Number IRSM807-045MH
Description Half-Bridge Module
Page 11 Pages


IRSM807-045MH datasheet pdf
View PDF for PC
IRSM807-045MH pdf
View PDF for Mobile


No Preview Available !

IRSM807-045MH
4A, 500V
Half-Bridge Module
For Small Appliance Motor Drive Applications
Description
IRSM807-045MH is a 4A, 500V half-bridge module designed for advanced appliance motor drive applications
such as energy efficient fans and pumps. IR's technology offers an extremely compact, high performance half-
bridge topology in an isolated package. This advanced IPM offers a combination of IR's low RDS(on) Trench
FREDFET technology and the industry benchmark half-bridge high voltage, rugged driver in a small PQFN
package. At only 8x9mm and featuring integrated bootstrap functionality, the compact footprint of this surface-
mount package makes it suitable for applications that are space-constrained. IRSM807-045MH functions without
a heat sink.
Features
Integrated gate drivers and bootstrap functionality
Suitable for sinusoidal or trapezoidal modulation
Low RDS(on) Trench FREDFET
Under-voltage lockout for both channels
Matched propagation delay for all channels
Optimized dV/dt for loss and EMI trade offs
3.3V input logic compatible
Active high HIN and LIN
Isolation 1500VRMS min
IRSM807-045MH
Base Part Number
Package Type
IRSM807-045MH
32L PQFN 8x9
Standard Pack
Form
Quantity
Tray 1300
Tape & Reel 2000
Orderable Part Number
IRSM807-045MH
IRSM807-045MHTR
1 www.irf.com
© 2014 International Rectifier
August 13, 2014



No Preview Available !

Internal Electrical Schematic
VB
VCC
HIN
LIN
COM
600V Half Bridge
driver with built
in bootstrap
IRSM807-045MH
IRSM807-045MH
V+
Vs
V-
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the module may occur. These are not tested at
manufacturing. All voltage parameters are absolute voltages referenced to VSS unless otherwise stated in the table. The
thermal resistance rating is measured under board mounted and still air conditions.
Symbol
Description
BVDSS
FREDFET Blocking Voltage
IO @ TC=25°C
DC Output Current
IOP Pulsed Output Current (Note 1)
Pd Maximum Power Dissipation per FREDFET @ TC =25°C
VISO Isolation Voltage (1min) (Note 2)
TJ Operating Junction Temperature
TL Lead Temperature (Soldering, 30 seconds)
TS Storage Temperature
VS1,2,3
High Side Floating Supply Offset Voltage
VB1,2,3
High Side Floating Supply Voltage
VCC Low Side and Logic Supply voltage
VIN Input Voltage of LIN, HIN
Note 1: Pulse Width = 100µs, TC =25°C, Duty=1%.
Note 2: Characterized, not tested at manufacturing.
Min
---
---
---
---
---
-40
---
-40
VB1,2,3 - 20
-0.3
-0.3
VSS -0.3
Max
500
4
35
50
1500
150
260
150
VB1,2,3 +0.3
500
20
VCC+0.3
Unit
V
A
W
VRMS
°C
°C
°C
V
V
V
V
2 www.irf.com
© 2014 International Rectifier
August 13, 2014



No Preview Available !

IRSM807-045MH
Recommended Operating Conditions
Symbol
V+
Description
Positive DC Bus Input Voltage
Min Max Unit
--- 400 V
VS1,2,3
High Side Floating Supply Offset Voltage
(Note 3)
400 V
VB1,2,3
High Side Floating Supply Voltage
VS+12
VS+20
V
VCC Low Side and Logic Supply Voltage
12 16.5 V
VIN Logic Input Voltage
COM
VCC V
Fp PWM Carrier Frequency
--- 20 kHz
The Input/Output logic diagram is shown in Figure 1. For proper operation the module should be used within the
recommended conditions. All voltages are absolute referenced to COM. The VS offset is tested with all supplies biased at 15V
differential.
Note 3: Logic operational for Vs from COM-8V to COM+500V. Logic state held for Vs from COM-8V to COM-VBS.
Static Electrical Characteristics
(VCC-COM) = (VB-VS) = 15 V. TA = 25oC unless otherwise specified. The VIN and IIN parameters are referenced to VSS and are
applicable to all six channels. The VCCUV parameters are referenced to VSS. The VBSUV parameters are referenced to VS.
Symbol Description
Min Typ Max Units Conditions
BVDSS
ILKH
Drain-to-Source Breakdown Voltage
Leakage Current of High Side FET
500 ---
10
--- V TJ=25°C, ILK=250uA
µA TJ=25°C, VDS=500V
ILKL
Leakage Current of Low Side FET Plus Gate
Drive IC
15
µA TJ=25°C, VDS=500V
RDS(ON)
VSD
VHIN/LIN
VHIN/LIN
VCCUV+,
VBSUV+
Drain to Source ON Resistance
Diode Forward Voltage
Logic “1” input voltage for HIN and LIN
Logic “0” input voltage for HIN and LIN
VCC and VBS Supply Under-Voltage, Positive
Going Threshold
---
---
---
2.2
---
8
1.5
3
0.85
---
---
8.9
1.7
---
---
---
0.8
9.8
TJ=25°C, VCC=10V, Id =
2A
Ω
TJ=150°C, VCC=10V, Id
= 2A (Note 4)
V TJ=25°C, Id = 2A
V
V
V
VCCUV-,
VBSUV-
VCC and VBS supply Under-Voltage, Negative
Going Threshold
6.9
7.7
8.5
V
VCCUVH,
VBSUVH
VCC and VBS Supply Under-Voltage Lock-Out
Hysteresis
IQBS Quiescent VBS Supply Current VIN=0V
IQCC Quiescent VCC Supply Current VIN=0V
IIN+ Input Bias Current VIN=4V
IIN- Input Bias Current VIN=0V
RBR Internal Bootstrap Equivalent Resistor Value
Note 4: Characterized, not tested at manufacturing
---
---
---
---
---
---
0.7
45
1100
5
---
200
---
70
3000
20
2
---
V
µA
µA
µA
µA
Ω TJ=25°C
3 www.irf.com
© 2014 International Rectifier
August 13, 2014



No Preview Available !

IRSM807-045MH
Dynamic Electrical Characteristics
(VCC-COM) = (VB-VS) = 15 V. TA = 25oC unless otherwise specified.
Symbol Description
Min Typ Max
Units
Conditions
TON
TOFF
Input to Output Propagation Turn-On
Delay Time
Input to Output Propagation Turn-Off
Delay Time
--- 0.9 1.5
--- 0.9 1.5
µs
ID=1mA, V+=50V
µs
DT
TFIL,IN
Built-in Dead Time
Input Filter Time (HIN, LIN)
--- 300 ---
--- 300 ---
ns
ns
FREDFET Avalanche Characteristics
Symbol Description
Min Typ Max Units Conditions
EAS
Single Pulse Avalanche Energy (Note 5) --- 209 ---
Note 5: Characterized using TO-220 packaged device
mJ TJ=25°C, L=9.5mH, VDD=150V, IAS=6.7A
Thermal and Mechanical Characteristics
Symbol
Description
Min Typ Max Units Conditions
Rth(J-CT)
Total Thermal Resistance Junction to Case
Top (Note 6)
---
25
--- °C/W
Rth(J-CB)
Total Thermal Resistance Junction to Case
Bottom (Note 6)
---
1.55
--- °C/W
Note 6: Calculated
Qualification Information
Qualification Level
Industrial††
Moisture Sensitivity Level
MSL3†††
ESD
Machine Model
Human Body Model
Class B
Class 1C
RoHS Compliant
Yes
† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
†† Higher qualification ratings may be available should the user have such requirements. Please contact
your International Rectifier sales representative for further information.
††† Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
4 www.irf.com
© 2014 International Rectifier
August 13, 2014



IRSM807-045MH datasheet pdf
Download PDF
IRSM807-045MH pdf
View PDF for Mobile


Related : Start with IRSM807-045M Part Numbers by
IRSM807-045MH Half-Bridge Module IRSM807-045MH
International Rectifier
IRSM807-045MH pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact