IRM8601S Datasheet PDF - Everlight Electronics

www.Datasheet-PDF.com

IRM8601S
Everlight Electronics

Part Number IRM8601S
Description Infrared Remote-control Receiver Module
Page 8 Pages


IRM8601S datasheet pdf
View PDF for PC
IRM8601S pdf
View PDF for Mobile


No Preview Available !

EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DMO-860-014
ECN :
Infrared Remote-control Receiver Module
REV : 1.1
PAGE : 1/8
MODEL NO :
IRM-8601S
Features :
High protection ability to EMI and metal case can be customized.
Mold type and metal case type to meet the design of front panel.
Elliptic lens to improve the characteristic against
Line-up for various center carrier frequencies.
Low voltage and low power consumption.
High immunity against ambient light.
Photodiode with integrated circuit.
TTL and CMOS compatibility.
Long reception distance.
High sensitivity.
Description :
The device is a miniature type infrared remote control system receiver which has been developed
and designed by utilizing the most updated IC technology. The PIN diode and preamplifier are
assembled on lead frame, the epoxy package is designed as an IR filter. The demodulated output
signal can directly be decoded by a microprocessor.
Applications :
1. Optical switch
2. Light detecting portion of remote control
AV instruments such as Audio, TV, VCR, CD, MD, etc.
Home appliances such as Air-conditioner, Fan , etc.
The other equipments with wireless remote control.
CATV set top boxes
Multi-media Equipment
PART
Chip
Shell
MATERIAL
Silicon
Tinplate
COLOR
Black
Silver-white



No Preview Available !

EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DMO-860-014
ECN :
Infrared Remote-control Receiver Module
REV : 1.1
PAGE : 2/8
MODEL NO :
IRM-8601S
NOTES
Package Dimension :
1. This drawing measure is a standard value.
All dimensions are in millimeter.
2. In case of designation is tolerance ± 0.3mm.
3. Lead spacing is measured where the lead
emerge from the package.
4. Protruded resin under flange 1.0mm Max.
5. Lens color: Black.
6. Above specification may be changed without
notice. EVERLIGHT will reserve authority
on material change for above specification.
7. These specification sheets include materials
protected under copyright of EVERLIGHT
corporation. Please don't reproduce or
cause anyone to reproduce them without
EVERLIGHT consent.
8. When using this produce, please observe the
absolute maximum ratings and the
instructions for use outlined in these
specification sheets. EVERLIGHT assumes
no responsibility for any damage resulting
from use of the product which does not
comply with the absolute maximum ratings
and the instructions included in these
specification sheets.



No Preview Available !

EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DMO-860-014
ECN :
Infrared Remote-control Receiver Module
REV : 1.1
PAGE : 3/8
MODEL NO :
IRM-8601S
Absolute Maximum Ratings at TA = 25
Parameter
Symbol
Rating
Supply Voltage Vcc 0~6
Operating Temperature
Topr
-30 ~ +85
Storage Temperature
Tstg
-40 ~ +85
Soldering Temperature
Tsol
260
Unit
Notice
V
4mm from mold body
less than 5 seconds
Electronic Optical Characteristics :
Parameter
Symbol MIN. TYP.
Supply Voltage
Vcc 4.5
5
Supply Current
Icc ---
---
B.P.F Center Frequency Fo --- 38
Peak Wavelength
λp --- 940
Reception Distance
D
8
---
4 ---
Half Angle(Horizontal) Θh --- 45
Half Angle(Vertical)
Θv
---
35
High Level Pulse Width TH 400 ---
Low Level Pulse Width TL 400 ---
High Level Output
Voltage
Low Level Output
Voltage
VH 4.5 ---
VL --- 0.2
MAX. Unit
TA = 25
Condition
5.5 V DC voltage
3 mA No signal input
--- KHz
--- nm
---
---
m
At the ray axis
*1
--- deg
--- deg
800 μs
At the ray axis
800 μs
*2
--- V
0.5 V



No Preview Available !

EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : DMO-860-014
ECN :
Infrared Remote-control Receiver Module
REV : 1.1
PAGE : 4/8
MODEL NO :
IRM-8601S
Appendix of Page 3
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of φ= 0° and φ=45°.
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.
Test Method
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
cMeasurement place
A place that is nothing of extreme light reflected in the room.
dExternal light
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee10Lux)
eStandard transmitter
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).
(Standard light / Light source temperature 2856°K).
fMeasuring system
According to the measuring system shown in Fig.-3
Block Diagram



IRM8601S datasheet pdf
Download PDF
IRM8601S pdf
View PDF for Mobile


Related : Start with IRM8601 Part Numbers by
IRM8601S Infrared Remote-control Receiver Module IRM8601S
Everlight Electronics
IRM8601S pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact