IRKD56 Datasheet PDF - International Rectifier

www.Datasheet-PDF.com

IRKD56
International Rectifier

Part Number IRKD56
Description (IRKxxx) ADD-A-pak GEN V Power Modules
Page 9 Pages


IRKD56 datasheet pdf
Download PDF
IRKD56 pdf
View PDF for Mobile


No Preview Available !

Bulletin I27140 rev. E 10/02
www.DataSheet4U.com STANDARD DIODES
Features
High Voltage
Industrial Standard Package
Thick Al metal die and double stick bonding
Thick copper baseplate
UL E78996 approved
3500VRMS isolating voltage
IRK.56, .71 SERIES
ADD-A-pakTM GEN V Power Modules
Benefits
Up to 1600V
Full compatible TO-240AA
High Surge capability
Easy Mounting on heatsink
Al203 DBC insulator
Heatsink grounded
60 A
80 A
Mechanical Description
The Generation V of Add-A-pak module combine the
excellent thermal performance obtained by the usage
of Direct Bonded Copper substrate with superior
mechanical ruggedness, thanks to the insertion of a
solid Copper baseplate at the bottom side of the device.
The Cu baseplate allow an easier mounting on the
majority of heatsink with increased tolerance of surface
roughness and improve thermal spread.
The Generation V of AAP module is manufactured
without hard mold, eliminating in this way any possible
direct stress on the leads.
The electrical terminals are secured against axial pull-out:
they are fixed to the module housing via a click-stop
feature already tested and proved as reliable on other IR
modules.
Electrical Description
These modules are intended for general purpose high
voltage applications such as high voltage regulated power
supplies, lighting circuits, temperature and motor speed
control circuits, UPS and battery charger.
Major Ratings and Characteristics
Parameters
IF(AV)
@ 100°C
IRK.56
60
IRK.71
80
Units
A
IF(RMS)
IFSM@ 50Hz
@ 60Hz
I2t @ 50Hz
@ 60Hz
I2t
VRRM range
TJ
TSTG
94 126
1600
1680
1790
1870
12.89
11.76
15.90
14.53
128.9
159
400 to 1600
- 40 to 150
- 40 to150
A
A
A
KA2s
KA2s
KA2s
V
oC
oC
www.irf.com
1



No Preview Available !

www.DataSheet4U.com
IRK.56, .71 Series
Bulletin I27140 rev. E 10/02
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Voltage
Type number Code
VRRM , maximum repetitive
peak reverse voltage
V
04 400
IRK.56/ .71
06
08
10
12
14
600
800
1000
1200
1400
16 1600
VRSM , maximum non-
repetitive peak rev. voltage
V
500
700
900
1100
1300
1500
1700
IRRM max.
@ 150°C
mA
10
Forward Conduction
Parameter
IF(AV) Max. average forward current
@ Case temperature
IF(AV) Max. average forward current
@ Case temperature
IF(RMS) Max. RMS forward current
IFSM Max. peak, one-cycle forward,
non-repetitive surge current
I2t Maximum I2t for fusing
I2t Maximum I2t for fusing
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1 Low level value of forward
slope resistance
rf2 High level value of forward
slope resistance
VFM Max. forward voltage drop
IRK.56
60
100
55
105
94
1600
1680
1350
1420
12.89
11.76
9.12
8.32
128.9
0.96
1.03
2.81
2.48
1.51
IRK.71 Units Conditions
80
100
70
108
126
1790
1870
1500
1570
15.90
14.53
11.25
10.23
159.0
0.83
0.92
A 180° conduction, half sine wave
°C
A 180° conduction, half sine wave
°C
A DC @ 92°C case temperature
t = 10ms No voltage
t = 8.3ms reapplied
A
t = 10ms 100% VRRM
t = 8.3ms reapplied Sinusoidal half wave,
KA2s
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
No voltage Initial TJ = TJ max.
reapplied
100% VRRM
reapplied
KA2s t = 0.1 to 10ms, no voltage reapplied
(16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
V
(I
>
x
π
x
IF(AV)),
T
J
=
T
J
max.
2.68
2.40
1.50
(16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
m
(I > x π x IF(AV)), TJ = TJ max.
V IFM = π x IF(AV), TJ = 25°C, tp = 400µs square wave
Blocking
Parameter
IRRM Max. peak reverse leakage
current
VINS RMS isolation voltage
IRK.56 IRK.71 Units Conditions
10
3500 (1 sec)
mA TJ = 150oC
V 50 Hz, circuit to base, all terminals shorted
2 www.irf.com



No Preview Available !

IRK.56, .71 Series
Bulletin I27140 rev. E 10/02
www.DataSheet4U.com
Thermal and Mechanical Specifications
Parameter
IRK.56 IRK.71 Units Conditions
TJ
Tstg
RthJC
RthCS
T
wt
Junction temperature range
Storage temperature range
Max. thermal resistance,
junction to case
Typical thermal resistance,
case to heatsink
Mounting tourque ±10%
to heatsink
busbar
Approximate weight
Case style
-40 to 150
-40 to 150
0.5 0.4
0.1
5
4
110 (4)
TO-240AA
°C
°C
K/W Per junction, DC operation
Mounting surface flat, smooth and greased
K/W
Nm
gr (oz)
A mounting compound is recommended and the
torque should be rechecked after a period of 3 hours
to allow for the spread of the compound
JEDEC
R Conduction (per Junction)
(The following table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC)
Devices
180o
Sine half wave conduction
120o
90o
60o 30o
Rect. wave conduction
180o
120o
90o
60o
30o
Units
IRK.56 0.11 0.13 0.16 0.22 0.32 0.09 0.14 0.17 0.23 0.32
°C/W
IRK.71 0.06 0.08 0.11 0.14 0.21 0.06 0.09 0.11 0.15 0.21
Ordering Information Table
Device Code
IRK D 71 / 16 A
1 23
45
1 - Module type
2 - Circuit configuration (See Circuit Configuration Table)
3 - Current code
4 - Voltage code (See Voltage Ratings Table)
5 - A: Gen V
www.irf.com
3



No Preview Available !

IRK.56, .71 Series
Bulletin I27140 rev. E 10/02
Outline Table
www.DataSheet4U.com
IRKD
(1)
~
Dimensions are in millimeters and [inches]
Circuit Configuration Table
IRKE
IRKJ
(1)
-
IRKC
(1)
+
(2) D = 2 diodes in series
+
+
E = Single diode
+-
(2) (2) (2) J = 2 diodes/common anode
C = 2 diodes/common cathode
-
-+
-
(3)
(3) (3)
(3)
NOTE: To order the Optional Hardware see Bulletin I27900
4
www.irf.com



IRKD56 datasheet pdf
Download PDF
IRKD56 pdf
View PDF for Mobile


Related : Start with IRKD5 Part Numbers by
IRKD56 (IRKxxx) ADD-A-pak GEN V Power Modules IRKD56
International Rectifier
IRKD56 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact