IA64F3048SEC Datasheet PDF - InnovASIC



Part Number IA64F3048SEC
Page 2 Pages

IA64F3048SEC datasheet pdf
View PDF for PC
IA64F3048SEC pdf
View PDF for Mobile

No Preview Available !

Advance Information Sheet
8 Kbytes SRAM
129 Kbytes Flash Memory A (includes 1Kbyte security bits & trim flash)
32 Kbytes Flash Memory B
Additional 32 x 32 multiply instruction
50MHz Clock Rate
FWE pin changed to BME (Boot Mode Enable)
Sixteen 16-bit general registers
Flexible instruction set built on 62 basic instruction types
8/16/32-bit data transfer, arithmetic, and logic instructions
Signed and unsigned multiply and divide instructions
Extensive bit manipulation instructions
Bus controller with 8-bit access
3-function refresh controller
DMA controller with short or full address mode
16-bit integrated timer unit (ITU) with 5 channels
Programmable timing pattern controller (TPC)
Watchdog timer
Serial communications interface (SCI) with built-in smart card interface
Eight 10-bit A/D converter channels
Two 8-bit D/A converter channels
Clock pulse generator
Interrupt controller with 37 sources
Seventy input/output pins and eight input-only pins
Available in 100 pin QFP package
The IA64F3048SEC is code compatible with the original Hitachi® H8/300H family of
microcontrollers, with additional security enhancements designed into the device. innovASIC
produces replacement ICs using its MILESTM, or Managed IC Lifetime Extension System, cloning
technology. This technology produces replacement ICs far more complex than "emulation" while
ensuring they are compatible with the original IC. MILESTM captures the design of a clone so it can
be produced even as silicon technology advances. MILESTM also verifies the clone against the
original IC so that even the "undocumented features" are duplicated.
This Advanced Information Sheet contains preliminary information for this the IA64F3048SEC.
The complete data sheet which documents all necessary engineering information about the
IA64F3048SEC including functional and I/O descriptions, electrical characteristics, and applicable
timing will be available when the device nears completion.
Copyright © 2003
The End of Obsolescence®
Page 1 of 2
Customer Support:

No Preview Available !

Advance Information Sheet
The IA64F3048SEC Security-Enhanced Microcontroller is the ideal solution for many embedded
applications, combining the flexibility of the Hitachi® H8/300H family of microcontrollers with the
power of additional on-chip features. This combination allows the development of more complex
embedded applications than is possible with the H8 alone. It also eases the implementation of more
robust security features that are required of products today.
The IA64F3048SEC provides an upward compatibility path for Hitachi® H8/300H users who need
higher performance and on-chip security features. The IA64F3048SEC is code compatible with the
H8/300H family of microcontrollers and is pin compatible with the 100-pin QFP of the H8/3048
microcontroller series. Code development for the IA64F3048SEC utilizes standard H8/300H
software development tools, including compilers, assemblers, and linkers.
The IA64F3048SEC offers all of the standard features of the advanced H8/3048 microcontroller
series with a nearly doubled operating frequency of 30 MHz. InnovASIC has also added new
security-related features to make the IA64F3048SEC a compelling choice for embedded applications
that require higher levels of integrity, authenticity and data protection without loss of performance.
These security features include an extremely flexible 128 Kbytes of nonvolatile memory in two
independent partitions. The NV also has read-out protection and locking mechanisms to protect
vital data. Additional security enhancements include a high quality physical random number
generator and a fast 32x32 multiply with 64-bit result executed as an additional instruction. The
IA64F3048SEC also facilitates PKI and other challenge-response protocols.
Ordering Information
The IA64F3048SEC prototypes will be available in Q4 2003. For additional information, contact
Mike Berg, V.P. Sales and Marketing, at 1-888-824-4184, extension 128.
Copyright © 2003
The End of Obsolescence®
Page 2 of 2
Customer Support:

IA64F3048SEC datasheet pdf
Download PDF
IA64F3048SEC pdf
View PDF for Mobile

Related : Start with IA64F3048SE Part Numbers by
IA64F3048SEC pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact