IA4320 Datasheet PDF - Interation

www.Datasheet-PDF.com

IA4320
Interation

Part Number IA4320
Description Universal ISM Band FSK Transceiver
Page 29 Pages


IA4320 datasheet pdf
Download PDF for PC
IA4320 pdf
View PDF for Mobile


No Preview Available !

IFAS4K3R2t0eacSUehnievieevte4r rUs.acol mISM Band W I R E L E S SIA4D3A2T0A S H E E TDESCRIPTION
.DaIntegration’s IA4320 is a single chip, low power, multi-channel FSK receiver designed
for use in applications requiring FCC or ETSI conformance for unlicensed use in the
w315, 433, 868, and 915 MHz bands. Used in conjunction with IA4220/21, Integration
wAssociates’ FSK transmitters, the IA4320 is a flexible, low cost, and highly integrated
solution that does not require production alignments. All required RF functions are
wintegrated. Only an external crystal and bypass filtering are needed for operation.
mThe IA4320 has a completely integrated PLL for easy RF design, and its rapid
settling time allows for fast frequency hopping, bypassing multipath fading, and
ointerference to achieve robust wireless links. The PLL’s high resolution allows
.cthe usage of multiple channels in any of the bands. The baseband bandwidth (BW)
is programmable to accommodate various deviation, data rate, and crystal tolerance
requirements. The receiver employs the Zero-IF approach with I/Q demodulation,
therefore no external components (except crystal and decoupling) are needed in a
Utypical application. The IA4320 is a complete analog RF and baseband receiver
including a multi-band PLL synthesizer with an LNA, I/Q down converter mixers,
t4baseband filters and amplifiers, and I/Q demodulator.
The chip dramatically reduces the load on the microcontroller with integrated
edigital data processing: data filtering, clock recovery, data pattern recognition
and integrated FIFO. The automatic frequency control (AFC) feature allows using
ea low accuracy (low cost) crystal. To minimize the system cost, the chip can
provide a clock signal for the microcontroller, avoiding the need for two crystals.
hFor simple applications, the receiver supports a standalone operation mode. This
allows complete data receiver operation and control of four digital outputs based
Son the incoming data pattern without a microcontroller. In this mode, 12 or more
tapredefined frequency channels can be used in any of the four bands. For low power
applications, the device supports low duty-cycle operation based on the internal
wake-up timer.
aBLOCK DIAGRAM
.DIN1 13
wIN2 12
LNA
MIX I
AMP OC
MIX Q
Self cal.
AMP OC
ww omRFParts
PLL & I/Q VCO
with cal.
RSSI
BB Amp/Filt./Limiter
I/Q
Demod.
Data Filt
CLK Rec
clk
data
DCLK/
CFIL/
7 FFIT/
OUT2
DATA/
6 nFFS/
OUT2
FIFO
COMP
DQD
AFC
Data processing units
U.cCLK div
et48
eCLK/
taShLPDM
Xosc
9
XTL
WTM
with cal.
LBD
Low Power parts
Controller
Bias
15 1
2 34
5 16 10
ARSSI/ SDI/ SCK/ nSEL/ FFIT/ nIRQ/ VDI/ nRES/
FCS2 FCS0 FBS0 FBS1 SDO/ OUT1 FCS3 FCS1
OUT0
11 14
VSS VDD
PIN ASSIGNMENT
FCS0
FBS0
FBS1
OUT0
OUT1
OUT2
OUT3
LPDM
FCS3
FCS2
VDD
IN1
IN2
VSS
FCS1
XTL
SDI
SCK
nSEL
FFIT/SDO
nIRQ
DATA/nFFS
DCLK/CFIL/FFIT
CLK
VDI
ARSSI
VDD
IN1
IN2
VSS
nRES
XTL
Standalone
Mode
Microcontroller
Mode
See back page for ordering information.
FEATURES
• Fully integrated (low BOM, easy design-in)
• No alignment required in production
• Fast settling, programmable, high-resolution PLL
• Fast frequency hopping capability
• High bit rate (up to 115.2 kbps in digital mode and
256 kbps in analog mode)
• Direct differential antenna input
• Programmable baseband bandwidth (67 to 400 kHz)
• Analog and digital RSSI outputs
• Automatic frequency control (AFC)
• Data quality detection (DQD)
• Internal data filtering and clock recovery
• RX pattern recognition
• SPI compatible serial control interface
• Clock and reset signals for microcontroller
• 16 bit RX data FIFO
• Standalone operation mode without
microcontroller
• Low power duty-cycle mode (less than 0.5 mA
average supply current)
• Standard 10 MHz crystal reference
• Alternative OOK support
• Wake-up timer
• Low battery detector
• 2.2 to 5.4 V supply voltage
• Low power consumption (~9 mA in low bands)
• Low standby current (0.3 µA)
• Compact 16-pin TSSOP package
TYPICAL APPLICATIONS
• Remote control
• Home security and alarm
• Wireless keyboard/mouse and other PC peripherals
• Toy control
• Remote keyless entry
• Tire pressure monitoring
• Telemetry
• Personal/patient data logging
• Remote automatic meter reading
www.DaIA4320-DS Rev 1.29r 1005
PRELIMINARY
1
www.integration.com

IA4320 datasheet pdf
Download PDF for PC
IA4320 pdf
View PDF for Mobile


Related : Start with IA432 Part Numbers by
IA4320 Universal ISM Band FSK Transceiver IA4320
Interation
IA4320 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   NEW   

Since 2010   ::   HOME   ::   Contact