HD74LV2GT241A Datasheet PDF - Renesas Technology

www.Datasheet-PDF.com

HD74LV2GT241A
Renesas Technology

Part Number HD74LV2GT241A
Description Dual Bus Buffer Noninverted
Page 9 Pages


HD74LV2GT241A datasheet pdf
Download PDF
HD74LV2GT241A pdf
View PDF for Mobile

No Preview Available !

www.DataSheet4U.com
HD74LV2GT241A
Dual Bus Buffer Noninverted with 3–state Output /
CMOS Logic Level Shifter
REJ03D0152–0200Z
(Previous ADE-205-679A (Z))
Rev.2.00
Oct.23.2003
Description
The HD74LV2GT241A has dual bus buffer noninverted with 3–state output in an 8 pin package. Two
noninverters are included in one circuit. Each circuit can be independently controlled by the enable signal
OE or OE, which enables outputs when receiving a low or high-level signal, respectively. The input
protection circuitry on this device allows over voltage tolerance on the input, allowing the device to be used
as a logic–level translator from 3.0 V CMOS Logic to 5.0 V CMOS Logic or from 1.8 V CMOS logic to
3.0 V CMOS Logic while operating at the high-voltage power supply. Low voltage and high-speed
operation is suitable for the battery powered products (e.g., notebook computers), and the low power
consumption extends the battery life.
Features
The basic gate function is lined up as Renesas uni logic series.
Supplied on emboss taping for high-speed automatic mounting.
TTL compatible input level.
Supply voltage range : 3.0 to 5.5 V
Operating temperature range : –40 to +85°C
Logic-level translate function
3.0 V CMOS logic 5.0 V CMOS logic (@VCC = 5.0 V)
1.8 V or 2.5 V CMOS logic 3.3 V CMOS logic (@VCC = 3.3 V)
All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V, Output : Z)
Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
All the logical input has hysteresis voltage for the slow transition.
Ordering Information
Part Name
Package Type
HD74LV2GT241AUSE SSOP-8 pin
Package Code
TTP-8DBV
Package
Abbreviation
US
Taping Abbreviation
(Quantity)
E (3,000 pcs/reel)
Rev.2.00, Oct.23.2003, page 1 of 1



No Preview Available !

www.DataSheet4U.com
HD74LV2GT241A
Outline and Article Indication
• HD74LV2GT241A
Index band
Lot No.
SSOP–8
Function Table
Inputs
OE
L
L
H
Inputs
OE
H
H
L
H : High level
L : Low level
X : Immaterial
Z : High impedance
A
L
H
X
A
L
H
X
YMW
T41
Y : Year code
(the last digit of year)
M : Month code
W : Week code
Marking
Output Y
L
H
Z
Output Y
L
H
Z
Rev.2.00, Oct.23.2003, page 2 of 8



No Preview Available !

www.DataSheet4U.com
HD74LV2GT241A
Pin Arrangement
OE 1
A1 2
Y2 3
GND 4
8 VCC
7 OE
6 Y1
5 A2
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit Test Conditions
Supply voltage range
Input voltage range *1
Output voltage range *1, 2
VCC
VI
VO
Input clamp current
Output clamp current
Continuous output current
Continuous current through
VCC or GND
Maximum power dissipation
at Ta = 25°C (in still air) *3
IIK
IOK
IO
ICC or IGND
PT
–0.5 to 7.0
–0.5 to 7.0
–0.5 to VCC + 0.5
–0.5 to 7.0
–20
±50
±25
±50
200
V
V
V Output : H or L
VCC : OFF or output : Z
mA VI < 0
mA VO < 0 or VO > VCC
mA VO = 0 to VCC
mA
mW
Storage temperature
Tstg
–65 to 150
°C
Notes:
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.2.00, Oct.23.2003, page 3 of 8



No Preview Available !

www.DataSheet4U.com
HD74LV2GT241A
Recommended Operating Conditions
Item
Supply voltage
Input voltage
Output voltage
Operating temperature
Input rise / fall time
Symbol
VCC
VIN
VOUT
Topr
tr, tf
Ratings
Unit Test Conditions
3.0 to 5.5
V
0 to 5.5
V
0 to VCC
0 to 5.5
V
Output : Z
–40 to +85
°C
0 to 100 (VCC = 3.0 to 3.6 V) ns
0 to 20 (VCC = 4.5 to 5.5 V)
Electrical Characteristics
Ta = –40 to 85°C
Item
Symbol VCC (V) * Min Typ Max Unit Test condition
Input voltage VIH 3.0 to 3.6 1.5 — — V
4.5 to 5.5 2.0
VIL 3.0 to 3.6 — — 0.6
Hysteresis voltage VH
4.5 to 5.5
3.3
— 0.8
0.10 —
V VT+ – VT–
5.0 — 0.15 —
Output voltage VOH Min to Max VCC–0.1 — — V IOH = –50 µA
3.0
2.48 —
IOH = –6 mA
4.5 3.8 —
VOL Min to Max —
0.1
IOH = –12 mA
IOL = 50 µA
3.0 — — 0.44
IOL = 6 mA
4.5 — — 0.55
IOL = 12 mA
Input current
IIN
0 to 5.5
±1
µA VIN = 5.5 V or GND
Off state output
IOZ
Min to Max —
±5
µA VO = 5.5 V or GND
current
Quiescent
supply current
ICC
ICC
5.5
5.5
— — 10 µA VIN = VCC or GND,
IO = 0
— — 1.5 mA One input VIN = 3.4 V,
other input VCC or
GND
Output leakage
current
IOFF
0
——5
µA VO = 5.5 V
Input capacitance CIN
5.0
— 3.0 — pF VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Rev.2.00, Oct.23.2003, page 4 of 8



HD74LV2GT241A datasheet pdf
Download PDF
HD74LV2GT241A pdf
View PDF for Mobile


Related : Start with HD74LV2GT241 Part Numbers by
HD74LV2GT241A Dual Bus Buffer Noninverted HD74LV2GT241A
Renesas Technology
HD74LV2GT241A pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact