HCPL-2300 Datasheet PDF - Agilent

www.Datasheet-PDF.com

HCPL-2300
Agilent

Part Number HCPL-2300
Description (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler
Page 12 Pages


HCPL-2300 datasheet pdf
Download PDF
HCPL-2300 pdf
View PDF for Mobile

No Preview Available !

8 MBd Low Input Current
Optocoupler
Technical Data
HCPL-2300/HCPL-0300
Features
• Guaranteed Low Thresholds:
IF = 0.5 mA, VF 1.5 V
• High Speed: Guaranteed
5 MBd over Temperature
• Versatile: Compatible with
TTL, LSTTL and CMOS
• Efficient 820 nm AlGaAs LED
• Internal Shield for
Guaranteed Common Mode
Rejection
• Schottky Clamped, Open
Collector Output with
Optional Integrated Pull-Up
Resistor
• Static and Dynamic
Performance Guaranteed
from -40°C to 85°C
• Safety Approval
UL Recognized -3750 V rms for
1 minute
CSA Approved
IEC/EN/DIN EN 60747-5-2
Approved with VIORM = 630
V peak
(Option 060)
Applications
• Ground Loop Elimination
• Computer-Peripheral
Interfaces
• Level Shifting
• Microprocessor System
Interfaces
• Digital Isolation for A/D,
D/A Conversion
• RS-232-C Interface
• High Speed, Long Distance
Isolated Line Receiver
Description
The HCPL-2300/HCPL-0300
optocoupler combines an 820 nm
AlGaAs photon emitting diode
with an integrated high gain
photon detector. This
combination of Agilent designed
and manufactured semiconductor
devices brings new high
performance capabilities to
designers of isolated logic and
data communication circuits.
The new low current, high speed
AlGaAs emitter manufactured
with a unique diffused junction,
has the virtue of fast rise and fall
times at low drive currents.
Figure 6 illustrates the propaga-
tion delay vs. input current
characteristic. These unique
Functional Diagram
Schematic
NC 1
ANODE 2
CATHODE 3
NC 4
8 VCC
7 RL
IF
+
2
VF
6 VOUT
3
5 GND
SHIELD
A 0.1 µF CAPACITOR MUST
BE CONNECTED BETWEEN
PINS 8 AND 5 (SEE NOTE 1).
1000
ICC
8 VCC
RL
7
6 VO
GND
5
TRUTH TABLE
(POSITIVE LOGIC)
LED OUTPUT
ON L
OFF
H
A 0.1 pF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
www.DataSheet4U.net



No Preview Available !

2
characteristics enable this device
to be used in an RS-232-C inter-
face with ground loop isolation
and improved common mode
rejection. As a line receiver, the
HCPL-2300/HCPL-0300 will
operate over longer line lengths
for a given data rate because of
lower IF and VF specifications.
The output of the shielded inte-
grated detector circuit is an open
collector Schottky clamped tran-
sistor. The shield, which shunts
capacitively coupled common
mode noise to ground, provides a
guaranteed transient immunity
specification of 100 V/µs. The
output circuit includes an
optional integrated 1000 pull-
up resistor for the open collector.
This gives designers the flexibility
to use the internal resistor for
pull-up to five volt logic or to use
an external resistor for connec-
tion to supply voltages up to 18 V
(CMOS logic voltage).
The Electrical and Switching
Characteristics of the
HCPL-2300/HCPL-0300 are
guaranteed over a temperature
range of -40°C to 85°C. This
enables the user to confidently
design a circuit which will
operate under a broad range of
operating conditions.
Ordering Information
Specify part number followed by Option Number (if desired).
HCPL-2300# XXXX
060 = IEC/EN/DIN EN 60747-5-2 VIORM = 630 V peak Option
300 = Gull Wing Surface Mount Lead Option
500 = Tape/Reel Package Option (1 K min)
XXXE = Lead Free Option
Option data sheets available. Contact your Agilent sales representative or authorized distributor for
information.
Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July
2001 and lead free option will use “-”
Package Outline Drawings
Small Outline SO-8
Package HCPL-0300
8
3.937 ± 0.127
(0.155 ± 0.005)
PIN ONE 1
0.406 ± 0.076
(0.016 ± 0.003)
765
XXX
YWW
234
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
1.270 BSC
(0.050)
LAND PATTERN RECOMMENDATION
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
* 5.080 ± 0.127
(0.200 ± 0.005)
7°
45°
X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0 ~ 7°
0.228 ± 0.025
(0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
0.203 ± 0.102
(0.008 ± 0.004)
0.305 MIN.
(0.012)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.



No Preview Available !

3
8-Pin DIP Package (HCPL-2300)
TYPE NUMBER
1.19 (0.047) MAX.
9.65 ± 0.25
(0.380 ± 0.010)
87
65
A XXXXZ
YYWW RU
12 34
OPTION CODE*
DATE CODE
UL
RECOGNITION
1.78 (0.070) MAX.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
7.62 ± 0.25
(0.300 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
5° TYP.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS
"V" = OPTION 060
OPTION NUMBERS 300 AND 500 NOT MARKED.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (HCPL-2300)
9.65 ± 0.25
(0.380 ± 0.010)
87
65
LAND PATTERN RECOMMENDATION
1.016 (0.040)
6.350 ± 0.25
(0.250 ± 0.010)
10.9 (0.430)
12
34
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
3.56 ± 0.13
(0.140 ± 0.005)
1.27 (0.050)
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
2.0 (0.080)
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
1.080 ± 0.320
(0.043 ± 0.013)
2.54
(0.100)
0.635 ± 0.130
(0.025 ± 0.005)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.25
(0.025 ± 0.010)
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
12° NOM.



No Preview Available !

4
Solder Reflow Temperature Profile
300
PREHEATING RATE 3°C + 1°C/0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC. PEAK
TEMP.
245°C
200
160°C
150°C
140°C
100
2.5°C ± 0.5°C/SEC.
3°C + 1°C/0.5°C
PREHEATING TIME
150°C, 90 + 30 SEC.
30
SEC.
30
SEC.
PEAK
TEMP.
240°C
PEAK
TEMP.
230°C
SOLDERING
TIME
200°C
50 SEC.
ROOM
TEMPERATURE
0
0
TIGHT
TYPICAL
LOOSE
50 100 150 200 250
TIME (SECONDS)
Recommended Pb-Free IR Profile
Tp
TL 217 °C
260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
Tsmax 150 - 200 °C
Tsmin
ts
PREHEAT
60 to 180 SEC.
tp
tL
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
25
t 25 °C to PEAK
TIME
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200 °C, Tsmin = 150 °C
Regulatory Information
The HCPL-2300 has been
approved by the following
organizations:
UL
Recognized under UL 1577,
Component Recognition Program,
File E55361.
CSA
Approved under CSA Component
Acceptance Notice #5, File CA 88324.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884
Teil 2):2003-01
(Option 060 only)
Insulation and Safety Related Specifications
Parameter
Min. External Air Gap
(External Clearance)
Symbol Value Units
Conditions
L(IO1) 7.1 mm Measured from input terminals to output
terminals, shortest distance through air
Min. External Tracking Path
(External Creepage)
L(IO2) 7.4 mm Measured from input terminals to output
terminals, shortest distance path along body
Min. Internal Plastic Gap
(Internal Clearance)
0.08
mm Through insulation distance, conductor to
conductor, usually the direct distance
between the photoemitter and photodetector
inside the optocoupler cavity
Tracking Resistance
(Comparative Tracking Index)
CTI
200 Volts DIN IEC 112/VDE 0303 PART 1
Isolation Group
IIIa Material Group (DIN VDE 0110, 1/89, Table 1)
Option 300 – surface mount classification is Class A in accordance with CECC 00802.



HCPL-2300 datasheet pdf
Download PDF
HCPL-2300 pdf
View PDF for Mobile


Related : Start with HCPL-230 Part Numbers by
HCPL-2300 8 MBd Low Input Current Optocoupler HCPL-2300
Agilent(Hewlett-Packard)
HCPL-2300 pdf
HCPL-2300 (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler HCPL-2300
Agilent
HCPL-2300 pdf
HCPL-2300 (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler HCPL-2300
AVAGO TECHNOLOGIES
HCPL-2300 pdf
HCPL-2300060 8 MBd Low Input Current Optocoupler HCPL-2300060
Agilent(Hewlett-Packard)
HCPL-2300060 pdf
HCPL-2300300 8 MBd Low Input Current Optocoupler HCPL-2300300
Agilent(Hewlett-Packard)
HCPL-2300300 pdf
HCPL-2300500 8 MBd Low Input Current Optocoupler HCPL-2300500
Agilent(Hewlett-Packard)
HCPL-2300500 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact