HCPL-2300 Datasheet PDF - AVAGO TECHNOLOGIES

www.Datasheet-PDF.com

HCPL-2300
AVAGO TECHNOLOGIES

Part Number HCPL-2300
Description (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler
Page 14 Pages


HCPL-2300 datasheet pdf
Download PDF
HCPL-2300 pdf
View PDF for Mobile

No Preview Available !

HCPL-2300, HCPL-0300
8 MBd Low Input Current Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-2300/HCPL-0300 optocoupler combines
an 820 nm AlGaAs photon emitting diode with an
integrated high gain photon detector. This combina-tion
of Avago designed and manufactured semiconductor
devices brings new high performance capabilities to
designers of isolated logic and data communication cir-
cuits.
The new low current, high speed AlGaAs emitter manu-
factured with a unique diffused junction, has the virtue
of fast rise and fall times at low drive currents. Figure 6 il-
lustrates the propaga­tion delay vs. input current charac-
teristic. These unique characteristics enable this device
to be used in an RS-232-C inter­face with ground loop iso-
lation and improved common mode rejection. As a line
receiver, the HCPL-2300/HCPL-0300 will operate over
longer line lengths for a given data rate because of lower
IF and VF specifications.
Functional Diagram
NC 1
8 VCC
ANODE 2
7 RL
CATHODE 3
6 VOUT
Features
Guaranteed low thresholds: IF = 0.5 mA, VF ≤ 1.5 V
High speed: guaranteed 5 MBd over temperature
Versatile: compatible with TTL, LSTTL and CMOS
Efficient 820 nm AlGaAs LED
Internal shield for guaranteed common mode
rejection
Schottky clamped, open collector output with
optional integrated pull-up resistor
Static and dynamic performance guaranteed from
-40°C to 85°C
Safety approval
– UL recognized -3750 V rms for 1 minute
– CSA approved
– IEC/EN/DIN EN 60747-5-2 approved with
VIORM = 630 V peak (Option 060)
Applications
Ground loop elimination
Computer-peripheral interfaces
Level shifting
Microprocessor system interfaces
Digital isolation for A/D, D/A conversion
RS-232-C interface
High speed, long distance isolated line receiver
NC 4
5 GND
A 0.1 pF bypass capacitor must be connected between pins 5 and 8.
www.DataSheet4U.net
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.



No Preview Available !

Schematic
The output of the shielded inte­grated detector circuit is
an open collector Schottky clamped tran­sistor.The shield,
which shunts capacitively coupled common mode noise
to ground, provides a guaranteed transient immunity
specification of 100 V/µs. The output circuit includes an
optional integrated 1000 Ω pull-up resistor for the open
collector. This gives designers the flexibility to use the
internal resistor for pull-up to five volt logic or to use an
external resistor for connec­tion to supply voltages up to
18 V (CMOS logic voltage).
The Electrical and Switching Characteristics of the
HCPL-2300/HCPL-0300 are guaranteed over a tempera­
ture range of -40°C to 85°C. This enables the user to con-
fidently design a circuit which will operate under a broad
range of operating conditions.
Ordering Information
HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and are approved under CSA Component Ac-
ceptance Notice #5, File CA 88324.
   Option
Part
Number
RoHS non RoHS
Compliant Compliant
Package
Surface Gull Tape & UL 5000 Vrms/ IEC/EN/DIN
Mount Wing Reel 1 Minute rating EN 60747-5-2 Quantity
-000E
no option 300 mil DIP-8
50 per tube
-300E
#300
XX
50 per tube
HCPL-2300
-500E
-060E
#500
#060
X XX
1000 per reel
X 50 per tube
-360E
#360
XX
X 50 per tube
-560E
#560
X XX
X 1000 per reel
HCPL-0300
-000E
-500E
no option SO-8
#500
X
X
100 per tube
1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry. Combination of Option 020 and Option 060 is not available.
Example 1:
HCPL-2300-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’




No Preview Available !

Package Outline Drawings
Small Outline SO-8 Package HCPL-0300




No Preview Available !

8-Pin DIP Package (HCPL-2300)
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (HCPL-2300)




HCPL-2300 datasheet pdf
Download PDF
HCPL-2300 pdf
View PDF for Mobile


Related : Start with HCPL-230 Part Numbers by
HCPL-2300 8 MBd Low Input Current Optocoupler HCPL-2300
Agilent(Hewlett-Packard)
HCPL-2300 pdf
HCPL-2300 (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler HCPL-2300
Agilent
HCPL-2300 pdf
HCPL-2300 (HCPL-0300 / HCPL-2300) 8 MBd Low Input Current Optocoupler HCPL-2300
AVAGO TECHNOLOGIES
HCPL-2300 pdf
HCPL-2300060 8 MBd Low Input Current Optocoupler HCPL-2300060
Agilent(Hewlett-Packard)
HCPL-2300060 pdf
HCPL-2300300 8 MBd Low Input Current Optocoupler HCPL-2300300
Agilent(Hewlett-Packard)
HCPL-2300300 pdf
HCPL-2300500 8 MBd Low Input Current Optocoupler HCPL-2300500
Agilent(Hewlett-Packard)
HCPL-2300500 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact