G1117A Datasheet PDF - GTM

www.Datasheet-PDF.com

G1117A
GTM

Part Number G1117A
Description 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Page 4 Pages


G1117A datasheet pdf
Download PDF
G1117A pdf
View PDF for Mobile


No Preview Available !

www.DataSheet4U.com
ISSUED DATE :2006/06/06
REVISED DATE :
G 111 7 A
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator
Description
The G1117A is a low dropout at positive adjustable or fixed-mode regulator with minimum of 1A output current
capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications
such as high-speed bus termination and low current 3.3V logic supply. G1117A is also well suited for other
applications such as VGA cards. G1117A is guaranteed to have lower than 1.4V dropout at full load current
making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply.
Features
1.4Vmaximum dropout full load current
Fast transient response
Output current limiting
Built-in thermal shutdown
Good noise rejection
3-Terminal Adjustable or Fixed 1.5V,1.8V,2.5V,3.3V,5.0V
Package Dimensions
D
TO-92
E
S1
SEATING
PLANE
b1
e1
e
b
Typical Circuit
C
REF.
A
S1
b
b1
C
Millimeter
Min. Max.
4.45 4.7
1.02 -
0.36 0.51
0.36 0.76
0.36 0.51
REF.
D
E
L
e1
e
Millimeter
Min. Max.
4.44 4.7
3.30 3.81
12.70
-
1.150 1.390
2.42 2.66
G1117A
Page: 1/4



No Preview Available !

Block Diagram
ISSUED DATE :2006/06/06
REVISED DATE :
Pin Descriptions
Name I/O Pin#
Adj (GND)
1
Vout
O2
Vin I 3
Function
A resistor divider from this pin to the Vout pin and ground sets the output voltage (Ground
only for fixed mode)
The output of the regulator. A minimum of 10uF capacitor must be connected from this pin
to ground to insure stability.
The input pin of regulator. Typically a large storage capacitor is connected from this pin to
ground to insure that the input voltage does not sag below the minimum dropout voltage
during the load transient response. This pin must always be 1.3V higher than Vout in order
for the device to regulate properly.
Absolute Maximum Ratings
Symbol
Parameter
Vin DC Supply Voltage
PD Power Dissipation
TST Storage Temperature
TOP
Operating Junction Temperature Range
Ratings
-0.3 to 12
Internally Limited
-65 ~ + 150
0 ~ + 150
Unit
V
G1117A
Page: 2/4



No Preview Available !

ISSUED DATE :2006/06/06
REVISED DATE :
Electrical Characteristics
Parameter
Reference Voltage
Output Voltage
Line Regulation
Load Regulation
G1117AADJ
G1117A-1.5
G1117A-1.8
G1117A-2.5
G1117A-3.3
G1117A-5.0
G1117A-XXX
G1117AADJ
G1117A-1.5
G1117A-1.8
G1117A-2.5
G1117A-3.3
G1117A-5.0
Dropout Voltage
(VIN-VOUT)
G1117A-XXX
Conditions
MIN
Io=10mA, Tj=25 , (Vin-Vout )=1.5V
1.225
Io=10mA, Tj=25 , 3.0V Vin 12V
1.470
Io=10mA, Tj=25 , 3.3V Vin 12V
1.764
Io=10mA, Tj=25 , 4.0V Vin 12V
2.450
Io=10mA, Tj=25 , 4.8V Vin 12V
3.235
Io=10mA, Tj=25 , 6.5V Vin 12V
4.900
Io=10mA, Vout+1.5V<Vin<12V, Tj=25
-
Vin=3.3V, Vadj=0, 0mA<Io<1A, Tj=25 (Note 1,2) -
Vin=3.0V, 0mA<Io<1A, TJ=25 (Note 1,2)
-
Vin=3.3V, 0mA<Io<1A, TJ=25 (Note 1,2)
-
Vin=4.0V, 0mA<Io<1A, TJ=25 (Note 1,2)
-
Vin=5.0V, 0mA<Io<1A, TJ=25 (Note 1,2)
-
Vin=8.0V, 0mA<Io<1A, TJ=25 (Note 1,2)
-
TYP
1.250
1.500
1.800
2.500
3.300
5.000
-
-
12
15
20
26
40
MAX UNIT
1.275 V
1.530 V
1.836 V
2.550 V
3.365 V
5.100 V
0.2 %
1%
15 mV
18 mV
25 mV
33 mV
50 mV
Io=1A, ( Vout=0.1% Vout)
- 1.3 1.4 V
Current Limit
G1117A-XXX Vin-Vout=5V
1.1 -
-A
Minimum Load Current Adjustable model Vin=5V
- 5 10 mA
Adjust Pin Current
Adjustable model Vin=12V, Io=10mA
- 50 100 uA
Quiescent Current
fixed model
Vin=12V, Io=0mA
- - 12 mA
Thermal Regulation
TA=25 ,30ms pulse
- 0.008 0.04 %/W
Ripple Rejection
F=120Hz, COUT=25uF Tantalum, IOUT=1A
G1117A-XXX VIN=VOUT+3V
- 60 70 dB
Temperature Stability IO=10mA
- 0.5 - %
JA Thermal Resistance
Junction-to-Ambient(No
heat sink ;No air flow)
- 160 -
/W
Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation
are measured at a constant junction Temperature by low duty cycle pulse testing. Load regulation is measured at the
output lead =1/18” from the package.
Note 2: Line and load regulation are guaranteed up to the maximum power dissipation of 3W. Power dissipation is
determined by the difference in input and output and the output current. Guaranteed maximum power dissipation will
not be available over the full input/output range.
G1117A
Page: 3/4



No Preview Available !

Characteristics Curve
ISSUED DATE :2006/06/06
REVISED DATE :
Important Notice:
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM.
GTM reserves the right to make changes to its products without notice.
GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems.
GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C.
TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785
China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China
TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
G1117A
Page: 4/4



G1117A datasheet pdf
Download PDF
G1117A pdf
View PDF for Mobile


Related : Start with G1117 Part Numbers by
G1117 GaAsP photodiode G1117
Hamamatsu Corporation
G1117 pdf
G1117A 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator G1117A
GTM
G1117A pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact