G1000NL450 Datasheet PDF - IXYS

www.Datasheet-PDF.com

G1000NL450
IXYS

Part Number G1000NL450
Description Anode Shorted Gate Turn-Off Thyristor
Page 13 Pages


G1000NL450 datasheet pdf
Download PDF
G1000NL450 pdf
View PDF for Mobile

No Preview Available !

WESTCODE
An IXYS Company
Date:- 16 Jun-04
Data Sheet Issue:- 1
Anode Shorted Gate Turn-Off Thyristor
Type G1000NL450
Absolute Maximum Ratings
VDRM
VRSM
VRRM
VDC-link
VOLTAGE RATINGS
Repetitive peak off-state voltage, (note 1)
Non-repetitive peak off-state voltage, (note 1)
Repetitive peak reverse voltage
Non-repetitive peak reverse voltage
MAXIMUM
LIMITS
4500
4500
18
3000
UNITS
V
V
V
V
ITGQ
Ls
IT(AV)M
IT(RMS)
ITSM
ITSM2
I2t
di/dtcr
VRGM
Tj op
Tstg
RATINGS
Peak turn-off current, (note 2)
Snubber loop inductance, ITM=ITGQ, (note 2)
Mean on-state current, Tsink=55°C (note 3)
Nominal RMS on-state current, 25°C (note 3)
Peak non-repetitive surge current tp=10ms, (Note 4)
Peak non-repetitive surge current tp=2ms, (Note 4)
I2t capacity for fusing tp=10ms
Critical rate of rise of on-state current, (note 5)
Peak reverse gate voltage (note 6).
Operating temperature range
Storage temperature range
Notes:-
1) VGK-2Volts.
2) Tj=125°C, VD=67%VDM, VDM<VDRM, diGQ/dt=25A/µs, CS=2µF.
3) Double-side cooled, single phase; 50Hz, 180° half-sinewave.
4) Tj(initial)=125°C, single phase, 180° sinewave, re-applied voltage VD=VR10V.
5) IT=1000A repetitive, IGM=20A, diGM/dt please consult the factory.
6) May exceed this value during turn-off avalanche period.
MAXIMUM
LIMITS
1000
150
470
960
8
14
320×103
400
18
-40 to +125
-40 to +125
UNITS
A
nH
A
A
kA
kA
A2s
A/µs
V
°C
°C
Data Sheet. Type G1000NL450 Issue 1
Page 1 of 13
June, 2004



No Preview Available !

WESTCODE An IXYS Company
Characteristics
Anode Shorted Gate Turn-Off Thyristor type G1000NL450
VTM
IL
IH
dv/dtcr
IDRM
IRRM
IGKM
VGT
Parameter
Maximum peak on-state voltage
Latching current
Holding current.
Critical rate of rise of off-state voltage
Peak off state current
Peak reverse current
Peak negative gate leakage current
Gate trigger voltage
IGT Gate trigger current
td
tr
tgt
EON
tS
tf
tgq
EOFF
IGQM
QGQ
Delay time
Rise time
Turn-on time
Turn-on energy per pulse
Storage time
Fall time
Turn-off time
Turn-off energy per pulse
Peak turn-off gate current
Turn-off gate charge
RthJK Thermal resistance junction to sink
F Mounting force
Wt Weight
MIN
-
-
-
1000
-
-
-
-
-
-
5
-
-
-
-
-
-
-
-
-
-
-
-
-
15
-
TYP MAX TEST CONDITIONS
- 4.0 IG=3A, IT=1000A
- 20 Tj=25°C
- 20 Tj=25°C
- - VD=2800V, VG=0V/RG=0
- 50 Rated VDRM, VGR=-2V
- 50 Rated VRRM, RGK=
- 50 VGR=-16V
- 1.2 Tj=25°C
VD=24V, RA=0.1
- 4 Tj=-40°C
- 1 Tj=25°C VD=24V, RA=0.1
- - Tj=125°C
13
1 - VD=50%VDRM, ITGQ=1000A, diT/dt=300A/µs,
2 5 IGM=20A, diG/dt=20A/µs, CS=2µF
0.5 1
12 20
1-
16 25 VD=50%VDRM, VDM=VDRM, ITGQ=1000A,
1.5 3 diGQ/dt=25A/µs, VGR=-16V, CS=2µF, LS=150nH
300 400
2000 -
- 0.035 Double side cooled
- 0.076 Cathode side cooled
- 0.065 Anode side cooled
- 25 (see note 2)
600 -
Notes:-
1) Unless otherwise indicated Tj=125oC.
2) For other clamping forces, consult factory.
UNITS
V
A
A
V/µs
mA
mA
mA
V
A
A
mA
µs
µs
µs
J
µs
µs
µs
J
A
µC
K/W
K/W
K/W
kN
g
Data Sheet. Type G1000NL450 Issue 1
Page 2 of 13
June, 2004



No Preview Available !

WESTCODE An IXYS Company
Anode Shorted Gate Turn-Off Thyristor type G1000NL450
Notes on ratings and characteristics.
1. Maximum Ratings.
1.1 Off-state voltage ratings.
Unless otherwise indicated, all off-state voltage ratings are given for gate conditions as diagram 1. For
other gate conditions see the curves of figure 5. It should be noted that VDRM is the repeatable peak
voltage which may be applied to the device and does not relate to a DC operating condition. While not
given in the ratings, VDC should ideally be limited to 55% VDRM in this product.
Diagram 1.
1.2 Reverse voltage rating.
All devices in this series have a minimum VRRM of 18 Volts.
1.3 Peak turn-off current.
The figure given in maximum ratings is the highest value for normal operation of the device under
conditions given in note 2 of ratings. For other combinations of ITGQ and Cs see the curve in figure 10. The
curves are effective over the normal operating range of the device and assume a snubber circuit
equivalent to that given in diagram 2. If a more complex snubber, such as an Underland circuit, is
employed then the equivalent CS should be used and Ls<0.3µH must be ensured for the curves to be
applied.
Ls
Ds R
Cs
Diagram 2.
1.4 R.M.S and average current.
Measured as for standard thyristor conditions, double side cooled, single phase, 50Hz, 180° half-
sinewave. These are included as a guide to compare the alternative types of GTO thyristors available,
values can not be applied to practical applications, as they do not include switching losses.
1.5 Surge rating and I2t.
Ratings are for half-sinewave, peak value against duration is given in the curve of figure 2.
1.6 Snubber loop inductance.
Use of GTO thyristors with snubber loop inductance, Ls<0.3µH implies no dangerous Vs voltages (see
diagrams 2 & 3) can be applied, provided the other conditions given in note 1.3 are enforced. Alternatively
Vs should be limited to 800 Volts to avoid possible device failure.
Data Sheet. Type G1000NL450 Issue 1
Page 3 of 13
June, 2004



No Preview Available !

WESTCODE An IXYS Company
Anode Shorted Gate Turn-Off Thyristor type G1000NL450
1.7 Critical rate of rise of on-state current
The value given is the maximum repetitive rating, but does not imply any specific operating condition. The
high turn-on losses associated with limit di/dt would not allow for practical duty cycle at this maximum
condition. For special pulse applications, such as crowbars and pulse power supplies, a much higher di/dt
is possible. Where the device is required to operate with infrequent high current pulses, with natural
commutation (i.e. not gate turn-off), then di/dt>5kA/µs is possible. For this type of operation individual
specific evaluation is required.
1.8 Gate ratings
The absolute conditions above which the gate may be damaged. It is permitted to allow VGK(AV) during turn-
off to exceed VRGM which is the implied DC condition.
1.9 Minimum permissible off time.
This time relates specifically to re-firing of device (see also note on gate-off time 2.7). The value given in
the ratings applies only to operating conditions of ratings note 2.
1.10 Minimum permissible on-time.
Figure is given for minimum time to allow complete conduction of all the GTO thyristor islands. Where a
simple snubber, of the form given in diagram 1. (or any other non-energy recovery type which discharges
through the GTO at turn-on) the actual minimum on-time will usually be fixed by the snubber circuit time
constant, which must be allowed to fully discharge before the GTO thyristor is turned off. If the anode
circuit has di/dt<10A/µs then the minimum on-time should be increased, the actual value will depend upon
the di/dt and operating conditions (each case needs to be assessed on an individual basis).
Data Sheet. Type G1000NL450 Issue 1
Page 4 of 13
June, 2004



G1000NL450 datasheet pdf
Download PDF
G1000NL450 pdf
View PDF for Mobile


Related : Start with G1000NL45 Part Numbers by
G1000NL450 Anode Shorted Gate Turn-Off Thyristor G1000NL450
IXYS
G1000NL450 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact