E3Z-G Datasheet PDF - OMRON

www.Datasheet-PDF.com

E3Z-G
OMRON

Part Number E3Z-G
Description Grooved Design Eliminates Optical Axis Adjustment
Page 5 Pages


E3Z-G datasheet pdf
Download PDF
E3Z-G pdf
View PDF for Mobile

No Preview Available !

Grooved-type Photoelectric Sensor with Built-in Amplifier
E3Z-G
Grooved Design Eliminates Optical
Axis Adjustment
• One- and two-axis models available.
• Provides mutual interference prevention and EN standard
compliance.
CSM_E3Z-G_DS_E_5_1
Be sure to read Safety Precautions on
page 4.
Ordering Information
Sensors (Refer to Dimensions on page 4.)
Sensing
method
Appearance Connection method
Sensing distance
No. of opti-
cal axes
Infrared light
Model
NPN output
PNP output
Through-beam
Pre-wired (2 m)
Pre-wired Connector
(M8, 4 pins)
Pre-wired (2 m)
Pre-wired Connector
(M8, 4 pins)
E3Z-G61 2M *
E3Z-G81 2M
1
E3Z-G61-M3J 0.3M E3Z-G81-M3J 0.3M
25 mm
E3Z-G62 2M *
E3Z-G82 2M
2
E3Z-G62-M3J 0.3M E3Z-G82-M3J 0.3M
Note: Models with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number (e.g., E3Z-G61 0.5M).
* The following table shows the model numbers of e-CON Pre-wired Connectors that are available. The Ratings and Specifications are the same as those for the E3Z-
G61/G62.
No. of optical
axes
Cable length
Model
0.3 m E3Z-G61-ECON 0.3M
1 axis
0.5 m E3Z-G61-ECON 0.5M
2 m E3Z-G61-ECON 2M
0.3 m E3Z-G62-ECON 0.3M
2 axes
0.5 m E3Z-G62-ECON 0.5M
2 m E3Z-G62-ECON 2M
Accessories (Order Separately)
Sensor I/O Connectors (Refer to Dimensions on XS3.)
Cable specification
Appearance
Standard cable
Straight
L-shape
Note: Refer to Introduction to Sensor I/O Connectors for details.
Type of cable
2m
5m
4-wire
2m
5m
Protective Bracket (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R)
Appearance
Model
Applicable model
Model
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
E39-L149
E3Z-G
http://www.Datasheet4U.com
1



No Preview Available !

Ratings and Specifications
E3Z-G
Number of optical axes
1
2
Item
Model
NPN output
PNP output
E3Z-G61/E3Z-G61-M3J
E3Z-G81/E3Z-G81-M3J
E3Z-G62/E3Z-G62-M3J
E3Z-G82/E3Z-G82-M3J
Sensing distance
(distance between arms of groove)
25 mm
Standard sensing object
Opaque, 1.5-mm dia. min.
Light source (wavelength)
Infrared LED (940 nm)
Power supply voltage
12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption
25 mA max.
40 mA max.
Control output
Load power supply voltage: 26.4 VDC max.
Load current: 100 mA max. (Residual voltage: 1 V max.)
Open collector output (NPN or PNP depending on model)
Light-ON/Dark-ON selectable
Protection circuits
Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference pre-
vention
Response time
Operate or reset: 1 ms max.
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range
Operating: 25 to 55°C, Storage: 40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC between lead wires and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between lead wires and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection
IP64 (IEC 60529)
Connection method
Pre-wired cable (standard length: 2 m and 0.5 m)/Pre-wired Connector (standard length: 300 mm)
Indicator
Operation indicator (orange)
Weight
(packed
state)
Pre-wired
(with 2-m cable)
Pre-wired Connectors
Approx. 65 g
Approx. 30 g
Material Case
ABS (Acrylonitril Butadiene Styrene)
Accessories
Instruction manual
2



No Preview Available !

I/O Circuit Diagrams
NPN Output
No. of optical
axes/model
1 axis
E3Z-G61
E3Z-G61-M3J
Operation
mode
Timing charts
Light-ON
Incident light
No incident light
Operation
indicator
ON
(orange)
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between brown and black leads)
Dark-ON
Incident light
No incident light
Operation
indicator
(orange)
ON
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between brown and black leads)
2 axes
E3Z-G62
E3Z-G62-M3J
Light-ON
Incident light
No incident light
Operation
indicator
(orange)
ON
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between brown
and black (white) leads)
Dark-ON
Incident light
No incident light
Operation
indicator
(orange)
ON
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between brown
and black (white) leads)
Operation
selector
L side
(LIGHT ON)
D side
(DARK ON)
L side
(LIGHT ON)
D side
(DARK ON)
PNP Output
No. of optical
axes/model
1 axis
E3Z-G81
E3Z-G81-M3J
Operation
mode
Timing charts
Light-ON
Incident light
No incident light
Operation
indicator
(orange)
ON
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between blue and black leads)
Dark-ON
Incident light
No incident light
Operation
indicator
(orange)
ON
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between blue and black leads)
2 axes
Light-ON
Incident light
No incident light
Operation
indicator
(orange)
ON
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between blue and
black (white) leads)
E3Z-G82
E3Z-G82-M3J
Dark-ON
Incident light
No incident light
Operation
indicator
(orange)
ON
OFF
Control output ON
Output transistor OFF
Load
Operate
(e.g., relay) Reset
(Between blue and
black (white) leads)
Operation
selector
L side
(LIGHT ON)
D side
(DARK ON)
L side
(LIGHT ON)
D side
(DARK ON)
E3Z-G
Operation
indicator
(orange)
Output circuit
Photo-
electric
Sensor
Main
Circuit
Brown
1
12 to 24 VDC
100mA
max.
(Control output) Black
4
(S1)
ZD
Blue
3
Load
(relay)
0V
Connector Pin Arrangement
24
13
e-CON Connector Pin Arrangement
1
2
Pin 2 is not used.
3
4
Operation
indicator
S1
(orange)
Operation
indicator
S2
(orange)
Photo-
electric
Sensor
Main
Circuit
Brown
1
12 to 24 VDC
100mA
max.
(Control output) (S1) Black
4
Load
(relay)
ZD
(Control
output)
White
100mA
max.
2
(S2)
Load
(relay)
ZD
Blue
3
0V
Connector Pin Arrangement
24
13
e-CON Connector Pin Arrangement
1
2
3
4
Operation
indicator
(orange)
Output circuit
Photo-
electric
Sensor
Main
Circuit
Brown
1
ZD
Black
4
(Control output) 100mA
max.
Blue
3
12 to 24 VDC
Load
(relay)
0V
Connector Pin Arrangement
24
13
Operation
indicator
S1
(orange)
Pin 2 is not used.
Operation indicator
S2
(orange)
Brown
1
ZD
12 to 24 VDC
Photo-
electric
Sensor
Main
Circuit
(Control
output)
ZD
(Control output)
White
2
100mA
max.
Black
4
Load
(relay)
100mA Load
max.
(relay)
Blue
3
0V
Connector Pin Arrangement
24
13
3



No Preview Available !

E3Z-G
Plugs (Sensor I/O Connectors)
M8 connector
e-CON connector
42
31
1
2
3
4
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Wire color
Brown
White
Blue
Black
E39-ECON@M
E39-ECONW@M
Pin arrangement
Classifi- Wire Connector
cation color pin No.
Application
1-axis
models
2-axis
models
Brown
1
Power supply (+V)
White
DC
Blue
Black
2
3
4
--- Output 2 (S2)
Power supply (0 V)
Output Output 1 (S1)
Note: Pin 2 of 1-axis models is not used.
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Precautions for Correct Use
Do not use the product in atmospheres or environments that
exceed product ratings.
The degree of protection for this Product is IP64 (IEC).
The degree of protection for other models in the E3Z Series is
IP67.
Dimensions
Sensors
E3Z-G61
E3Z-G62
Optical axis S1 *
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
50
40
35
Optical axis S2 *
Two, 4.5 dia.
7.5
40 25
10.5
9 19
20
Pre-wired Connector Models
(E3Z-G@@@-M3J)
Operation
mode selector
4 dia. vinyl-insulated round cable with 3 or
4 conductors, Standard length: 0.3 m
24
20
36
4 20
4-dia. vinyl-insulated round cable
with 3 or 4 conductors (Conductor
cross section: 0.2 mm2 (AWG24),
Insulator diameter: 1.1 mm),
Standard lengths: 2 m, 0.5 m
13
M8
e-CON Pre-wired Connector Model
Connector: 37104-3122-000FL
(made by Sumitomo 3M)
11 5.9
1
Operation Indicator (orange)
* On the other side
Note: Both 1 and 2-axis models
have S1; only 2-axis models
2
3 15
4
15.6
have S2.
*S1 output: Black
*S2 output: White
4 dia. vinyl-insulated round
cable with 3 or 4 conductors,
Standard length: 0.3 m, 0.5m,
and 2m
Accessories (Order Separately)
Mounting Brackets
Refer to E39-L for details.
Sensor I/O Connectors
Refer to XS3F and E3Z (E39-ECON@) for details.
4



E3Z-G datasheet pdf
Download PDF
E3Z-G pdf
View PDF for Mobile


Related : Start with E3Z- Part Numbers by
E3Z-D61 Photoelectric Sensor E3Z-D61
OMRON
E3Z-D61 pdf
E3Z-D61-M1J Photoelectric Sensor E3Z-D61-M1J
OMRON
E3Z-D61-M1J pdf
E3Z-D61-M3J Photoelectric Sensor E3Z-D61-M3J
OMRON
E3Z-D61-M3J pdf
E3Z-D61-M5J Photoelectric Sensor E3Z-D61-M5J
OMRON
E3Z-D61-M5J pdf
E3Z-D62 Photoelectric Sensor E3Z-D62
OMRON
E3Z-D62 pdf
E3Z-D62-M1J Photoelectric Sensor E3Z-D62-M1J
OMRON
E3Z-D62-M1J pdf
E3Z-D62-M3J Photoelectric Sensor E3Z-D62-M3J
OMRON
E3Z-D62-M3J pdf
E3Z-D62-M5J Photoelectric Sensor E3Z-D62-M5J
OMRON
E3Z-D62-M5J pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact