E13D8 Datasheet PDF - ECLIPTEK

www.Datasheet-PDF.com

E13D8
ECLIPTEK

Part Number E13D8
Description OSCILLATOR
Page 2 Pages


E13D8 datasheet pdf
Download PDF
E13D8 pdf
View PDF for Mobile

No Preview Available !

E13D8 Series
• RoHS Compliant (Pb-Free)
• LVPECL Output Oscillators
• 3.3V Supply Voltage
• Ceramic 6-pad SMD Package
• Stability to ±25ppm
• Tri-State Output
• Complementary Output
• Available on Tape and Reel
• Wide Range of Available Frequencies
E13D8
www.DataSheet4U.com
H 2.0
L 7.0
W 5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Nominal Frequency
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Peak to Peak Output Voltage Swing
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Logic Control / Additional Output
Tri-State Input Voltage
Standby Current
Start Up Time
RMS Phase Jitter
Typical Phase Noise
75MHz, 77.76MHz, 80MHz, 100MHz, 106.25MHz, 125MHz, 150MHz, 155.52MHz, 156.25MHz, 159.375MHz, 187.5MHz,
212.5MHz, 250MHz, 311.04MHz, 312.5MHz
0°C to +70°C, or -40°C to +85°C
-55°C to 125°C
With Load
3.3VDC ±5%
75mA Maximum
Inclusive of All Conditions: Calibration Tolerance at 25°C, ±50ppm Maximum, or ±25ppm Maximum
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, 1st Year Aging
at 25°C, Shock, and Vibration
VCC -1.4VDC Minimum, VCC -1.2VDC Typical, VCC -0.9VDC Maximum
VCC -1.7VDC Minimum, VCC -1.85VDC Typical, VCC -2.0VDC Maximum
600mVdc Minimum, 800mVdc Typical, 1000mVdc Maximum
20% to 80% of waveform
300pSec Typical, 600pSec Maximum
at 50% of waveform
50 ±5(%)
50 Ohms into VCC-2.0VDC
Tri-State and Complementary Output
VIH of 70% of VCC Minimum
No Connection
Enables Output
Enables Output
VIL of 30% of VCC Maximum
Disabled Output, High Impedance, Without Load
Disables Output: High Impedance
600µA Maximum
10 mSeconds Maximum
FJ = 12kHz to 20MHz
0.7pSec Typical, 1 pSec Maximum
Fo=156.250MHz
-60dBc/Hz at 10Hz Offset
-90dBc/Hz at 100Hz Offset
-115dBc/Hz at 1kHz Offset
-129dBc/Hz at 10kHz Offset
-130dBc/Hz at 100kHz Offset
-131dBc/Hz at 1MHz Offset
-148dBc/Hz at 10MHz Offset
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13D8
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS4N
REV.DATE
10/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.



No Preview Available !

PART NUMBERING GUIDE
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±25ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
G=±25ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
E13D8 D 2 F - 155.520M TR
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
F=Tri-State and Complementary Output
DUTY CYCLE
2=50 ±5(%)
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State
Pin 2: No Connect
Pin 3: Case Ground
Pin 4: Output
Pin 5: Complementary Output
Pin 6: Supply Voltage
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Tolerances= +0.1
TAPE
A
B
C
D EF
16±.3-.1 7.5±.1 6.75±.1 4 ±.1
2±.1
F
GH
JK L
8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
Specification
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
N
50 MIN
T
22.4 MAX
O
20.2 MIN
U
360 MAX
P
13±.2
V
16.4+2-0
Q
40 MIN
QTY/REEL
1,000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13D8
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS4N
REV.DATE
10/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.



E13D8 datasheet pdf
Download PDF
E13D8 pdf
View PDF for Mobile


Related : Start with E13D Part Numbers by
E13D8 OSCILLATOR E13D8
ECLIPTEK
E13D8 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact