DO2010-104MLB Datasheet PDF - Coilcraft

www.Datasheet-PDF.com

DO2010-104MLB
Coilcraft

Part Number DO2010-104MLB
Description SMT Power Inductors
Page 2 Pages


DO2010-104MLB datasheet pdf
View PDF for PC
DO2010-104MLB pdf
View PDF for Mobile


No Preview Available !

Document 413-1
SMT Power Inductors – DO2010
• Smallest power inductor, only 2 mm square and 1 mm high
• Can handle up to 0.51 A of saturating current
Designer’s Kit C399 contains 5 of each part
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Weight  11 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000/7reel; 3500/13reel  Plastic tape:  12 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Inductance DCR SRF
±20%2 max3 typ4 Isat5 Irms6
Part number1 (µH) (Ohms) (MHz) (A) (A)
DO2010-123ML_ 12
DO2010-153ML_ 15
DO2010-223ML_ 22
DO2010-333ML_ 33
DO2010-473ML_ 47
1.84 35 0.51 0.39
2.14 30 0.47 0.36
2.80 25 0.42 0.32
4.10 20 0.34 0.25
6.00 16 0.28 0.21
DO2010-683ML_ 68 8.80 13 0.23 0.16
DO2010-104ML_ 100 15.7 11 0.18 0.13
DO2010-224ML_ 220 38.0 8.0 0.10 0.08
1. When ordering, please specify termination and packaging codes:
DO2010-123MLC
Termination: L = RoHS compliant matte tin over nickel over silver-
platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4191A or equivalent.
5. DC current at which the inductance drops 10% (typ) from its value with-
out current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.079 ±0.008
2,0 ±0,2
0.079 ±0.008
2,0 ±0,2
0.039 ±0.004
1,0 ±0,1
0.026
0,65
Dimensions are in
inches
mm
Recommended
Land Pattern
0.035
0,89
0.087
2,20
0.063
1,60
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 413-1  Revised 12/27/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.



No Preview Available !

Document 413-2
SMT Power Inductors–DO2010 Series
Typical L vs Current
Typical L vs Frequency
1000
1000
100 100 µH
47 µH
22 µH
100 µH
100
47 µH
22 µH
10 12 µH 10 12 µH
1
0.01
0.1 1
Current (A)
10
Typical Current Derating
120
110
100
90
80
70
60
50
40
30
20
10
0
-40
Isat
Irms
-20 0 20 40 60 80 100
Ambient temperature (°C)
120 140
1
0.01
0.1 1
Frequency (MHz)
10
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 413-2  Revised 12/27/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.



DO2010-104MLB datasheet pdf
Download PDF
DO2010-104MLB pdf
View PDF for Mobile


Related : Start with DO2010-104ML Part Numbers by
DO2010-104MLB SMT Power Inductors DO2010-104MLB
Coilcraft
DO2010-104MLB pdf
DO2010-104MLC SMT Power Inductors DO2010-104MLC
Coilcraft
DO2010-104MLC pdf
DO2010-104MLD SMT Power Inductors DO2010-104MLD
Coilcraft
DO2010-104MLD pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact