DF611 Datasheet PDF - Yamato

www.Datasheet-PDF.com

DF611
Yamato

Part Number DF611
Description FINE OVEN Instruction Manual
Page 30 Pages


DF611 datasheet pdf
Download PDF
DF611 pdf
View PDF for Mobile

No Preview Available !

Instruction Manual
For
FINE OVEN
Model DF411 DF611
DH411 DH611
Version 4
Thank you for purchasing the Yamato Scientific DF/DH fine oven.
• For correct use of this Fine oven, read this manual and the guarantee thoroughly before use.
After reading them, keep the manual and the guarantee in a safe place for quick reference
whenever required.
WARNING: Before using this product, carefully read and fully understand the instructions
on safety . (WARNINGS and CAUTIONS) that appears elsewhere in this
manual.
Be sure to follow the instructions and requirements on safety described in this manual when
handling the product. Yamato Scientific Co., Ltd. assumes no liability for customer failure to
comply with these instructions and requirements.
Yamato Scientific Co., LTD.
This paper has been printed on recycled paper.



No Preview Available !




No Preview Available !

EXPLANATIONS ABOUT SYMBOL MARKS ............................................................................. 1
Symbol mark table .....................................................................................................................2
PERIL ARTICLES............................................................................................................................ 4
BEFORE USING IT. ........................................................................................................................... 5
To install and preparation before using.........................................................................................5
Requirements for Installation ......................................................................................................9
PRECAUTIONS IN HANDLING ......................................................................................................10
SAFETY DEVICES AND ERROR CODES .......................................................................................14
Purposes and Operations of Safety Device and Counter-measures.......................................... 14
DESCRIPTION AND FUNCTION OF EACH PART .......................................................................15
Main unit ...................................................................................................................................... 15
PREPARATION AND CHECK BEFORE USING ............................................................................17
POWER ON/OFF ...............................................................................................................................18
METHOD OF OPERATION MENU..................................................................................................19
Selection of operation mode ......................................................................................................... 19
FIXED TEMPERATURE OPERATION INSTRUCTION ................................................................21
AUTO START OPERATION INSTRUCTION ..................................................................................23
AUTO STOP OPERATION METHOD ..............................................................................................25
PROGRAMMED OPERATION METHOD........................................................................................28
HANDLING METHOD OF PROGRAM MENU ...............................................................................31
To choose program menu function .............................................................................................. 31
TO MAKE OUT NEW PROGRAM ....................................................................................................33
TO EDIT PROGRAM .........................................................................................................................34
TO EDIT SEGMENT .........................................................................................................................35
TO ADD SEGMENT ..........................................................................................................................39
TO FINISH PROGRAM EDITING....................................................................................................40
TO DELETE PROGRAM ...................................................................................................................41
HANDING METHOD OF FUNCTION MENU ................................................................................42
To select function menu item....................................................................................................... 42
TO SET UP TIMER MODE ...............................................................................................................45
TO SET UP KEYLOCK MODE .........................................................................................................46
TO SET UP BUZZER MODE ............................................................................................................47
Calibration Offset Function ...............................................................................................................48
SETTING THE CALIBRATION OFFSET FUNCTION ...................................................................50
TO CHECK ACCUMULATED OPERATION TIME ........................................................................51
TO ADJUST TIME.............................................................................................................................52
TO MODULATE FAN BLADE(OPTION) .........................................................................................54
TO MODULATE DAMPER (OPTION) .............................................................................................55
SETTING THE COMMUNICATION LOCKOUT (OPTIONAL)......................................................57
INDEPENDENT OVERHEAT PREVENTION ................................................................................58
Setting the Temperature Range and Function .......................................................................... 58
Activation/Setting Method........................................................................................................... 58
Precautions ................................................................................................................................... 58
MAINTENANCE AND INSPECTION ..............................................................................................59
Daily check/care............................................................................................................................ 59
LONG STORAGE AND DISPOSAL..................................................................................................59
AFTER SERVICE AND WARRANTY...............................................................................................60
MEASURE..........................................................................................................................................61
SCHEMATICS....................................................................................................................................63
REPLACEMENT PARTS TABLE .....................................................................................................67



No Preview Available !

EXPLANATIONS ABOUT SYMBOL MARKS
NOTICE
This product and the instruction manual have several symbol marks to use
safely. The accident might happen caused by incorrect interpret and
using, classified shown in below.
Read this instruction manual after fully understand the meaning of the
symbol marks.
WARNING
CAUTION
Accident might cause a person to die or seriously injured(※1).
Accident might cause a person to slightly injured(※2)or
objective damages(※3).
1)“Seriously injured”means injured by electrical shock, fracture of a bone, poisoning
and the like with hospitalized or attend to hospital in long turm.
2)“Slightly injured”means injured by electrical shock, and the like not necessary to
send to a hospital.
3)“Physically damages”means damages of property just like equipments, machines,
structures and so on.
Denotes of symbol marks
This symbol mark showsWARNING(includeCAUTION)subject.
Concretely warning description is shown near to this symbol mark.
This symbol mark shows prohibit subject.
Concretely prohibit description is shown near to this symbol mark.
This symbol mark shows the subject sure to do.
Concretely description put into practice is shown near to this symbol mark.
1



DF611 datasheet pdf
Download PDF
DF611 pdf
View PDF for Mobile


Related : Start with DF61 Part Numbers by
DF61 Board-to-Wire Swing-Lock Connector DF61
HRS
DF61 pdf
DF61-2226SCF Board-to-Wire Swing-Lock Connector DF61-2226SCF
HRS
DF61-2226SCF pdf
DF61-2630SCF Board-to-Wire Swing-Lock Connector DF61-2630SCF
HRS
DF61-2630SCF pdf
DF61-2630SCF Board-to-Wire Swing-Lock Connector DF61-2630SCF
HRS
DF61-2630SCF pdf
DF61-2P-2.2V Board-to-Wire Swing-Lock Connector DF61-2P-2.2V
HRS
DF61-2P-2.2V pdf
DF61-2P-2.2V Board-to-Wire Swing-Lock Connector DF61-2P-2.2V
HRS
DF61-2P-2.2V pdf
DF61-2S-2.2C Board-to-Wire Swing-Lock Connector DF61-2S-2.2C
HRS
DF61-2S-2.2C pdf
DF61-2S-2.2C Board-to-Wire Swing-Lock Connector DF61-2S-2.2C
HRS
DF61-2S-2.2C pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact