D1U4-W-1600-54-HB3C Datasheet PDF - Murata Power Solutions

www.Datasheet-PDF.com

D1U4-W-1600-54-HB3C
Murata Power Solutions

Part Number D1U4-W-1600-54-HB3C
Description AC-DC Power Supply
Page 6 Pages


D1U4-W-1600-54-HB3C datasheet pdf
View PDF for PC
D1U4-W-1600-54-HB3C pdf
View PDF for Mobile


No Preview Available !

www.murata-ps.com
D1U4-W-1600-54-HBxC
AC-DC Power Supply
FEATURES
1600W Output Power
1.6"(1U) x 14.0" x 4.0"
(41.0mm x 355.6mm x 101.6mm)
54VDC Main; PoE compatible
12V SB Output
PMBus™ Power Management Bus supported by
dual redundant I2C interfaces.
N+1 Redundancy Capable; hot swap (up to 8
modules in parallel)
Active current sharing on 54VDC Main output;
integral bidirectional MOSFET output isolation
device
Over-Voltage, Over-Current; Over-Temperature
Protection
Internal variable speed cooling fans
20ms full cycle hold up
RoHS Compliant
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
Available now at
www.murata-ps.com/en/3d/acdc.html
PRODUCT OVERVIEW
The D1U4-W-1600-54-HBxC is a 1600W power factor corrected (PFC) front end power module intended for hot swap
redundant systems. There is a main output of 54VDC (floating with respect to chassis ground) and a 12VDC Standby/
bias output (that is present whenever the incoming AC source is applied.
The form factor is suitable for 1RU chassis enclosures and is designed to deliver reliable bulk DC power to servers,
workstations, storage systems, PoE switches or any 54VDC distributed power architecture requiring high power
density.
The high efficiency design supports speed controlled dual DC fans in a thermally optimized package that is self-pro-
tecting and able to auto recover from over-current and over-temperature events. Visual status information is provided
via front panel mounted LED indicators in addition to hardware logic signals and a PMBus™ management interface.
ORDERING GUIDE
Model Number
Power Output High
Line AC
Power Output Low
Line AC
Main Output
Standby
Output
Airflow
D1U4-W-1600-54-HB4C
D1U4-W-1600-54-HB3C
1600W
1200W
Back to front
54V 12V
Front to back
INPUT CHARACTERISTICS
Parameter
Input Voltage Operating Range
Input Frequency
Turn-on Input Voltage
Turn-off Input Voltage
Maximum Current @ VIN = 200Vac
Maximum Current @ VIN = 90Vac
Inrush Current
Power Factor
Conditions
Ramp Up
Ramp Down
1600W
1200W
Cold start between 0 to 1ms
At 230Vac; FL
Min. Typ. Max.
90 115/230 264
47 50/60 63
81 89
70.5 78.0
10
15
100
0.95
Units
Vac
Hz
Vac
Arms
Apk
OUTPUT VOLTAGE CHARACTERISTICS
Output
Voltage
Parameter
Conditions
Min. Typ. Max. Units
Voltage Set Point
Line & Load Regulation
54V
52.38
55.62
Vdc
54V Output Current
0 30 A
Ripple Voltage & Noise1
20MHz Bandwidth
540 mVp-p
Load Capacitance
3800 24,000 μF
Voltage Set Point
Line & Load Regulation
12
Vdc
11.64
12.36
12V Output Current
0 2A
Ripple Voltage & Noise1
20MHz Bandwidth
33 mVp-p
Load Capacitance
1530 μF
1 Ripple and noise are measured with a parallel combination of a 0.1μF ceramic capacitor and 2 x 270μF OSCON
capacitors on each of the power module outputs measurement nodes. See test set up diagram below.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
CB
Test Certicate
and Test Report
PM
CPS_D1U4-W-1600-54-HBxC.A01 Page 1 of 6



No Preview Available !

RIPPLE MEASUREMENT
D1U4-W-1600-54-HBxC
AC-DC Power Supply
Power Supply
AC Phase
2x270uF OSCON
AC Ground
0.1uF Ceramic
Load Box
BNC to BNC Shielded Cable
General Notes:
1. Load the outputs at specified minimum
output current.
2. Connect the probe as shown with the
input tip and ground as short as possible.
3. Take all measurements
4. Repeat the measurements with the
outputs at specified maximum output
current.
Oscilloscope
20MHz BW
OUTPUT CHARACTERISTICS
Parameter
Remote Sense
Efficiency
Output Rise (Monotonic)
Startup Time
Transient Response
Current Sharing Accuracy (up to 8 in parallel)
Hot Swap Transients
Hold Up Time
Conditions
Min. Typ. Max.
Units
Remote sense is not enabled on these variants due to the System Control feature and the relatively wide line &
load regulation window.
230Vac (excluding fan)
90 %
10% to 95% rise time
Overshoot less than 10% for all outputs; no negative transition at
turn off.
AC Ramp Up
3s
PS_ON activation
250 ms
54VDC 50% step (50-100%; 100%-50%)
load; 1A/μs
12VSB 1A/μs
±2700
±250
mV
At 100% load
±10 %
5%
100% load 230Vac nominal
20
ms
ENVIRONMENTAL CHARACTERISTICS
Parameter
Storage Temperature Range
Operating Temperature Range
Operating Humidity
Storage Humidity
Altitude
Shock
Operational Vibration
MTBF
Safety Approvals
Input Fusing
Weight
Conditions
Min. Typ. Max.
Non-Condensing
-40 70
0 50
Non-Condensing
10 90
5 90
3000
Non-Operating
30
Operational, 0.5G; 5-500Hz
Telcordia SR-332 40°C
630
CAN/CSA-C22.2 No.60950-1-07 Am 1:2011
ANSI/UL 60950-1-2011
IEC60950-1:2005 (2nd Ed)+A1:2009 and EN60950-1:2006/A11:2009/A1:2010/A12:2011
CQC GB4943,1-2011
Internal 20A/250V rated fast blow in AC line
4.63/2.1
Units
°C
%
M
G
K Hours
lbs/kg
www.murata-ps.com/support
CPS_D1U4-W-1600-54-HBxC.A01 Page 2 of 6



No Preview Available !

PROTECTION CHARACTERISTICS
Output
Voltage
Parameter
Over-Temperature
54V
Over-Voltage
Over-Current
Over-Voltage
12VSB
Over-Current
ISOLATION CHARACTERISTICS
Parameter
Insulation Safety Rating / Test Voltage
Isolation
Grounding
STATUS INDICATORS AND CONTROL SIGNALS
Status
LED Indicators
I2C and PMBus
SYS_CONTR
EMISSIONS AND IMMUNITY
Characteristic
Input Current Harmonics
Voltage Fluctuation & Flicker
Conducted Emissions
Radiated Emissions
ESD Immunity
Radiated Field Immunity
Electrical Fast Transients/Burst Immunity
Surge Immunity
RF Conducted Immunity
Magnetic Field Immunity
Voltage Dips & Interruptions
D1U4-W-1600-54-HBxC
AC-DC Power Supply
Conditions
Auto re-start
Latching
Constant Current for 200ms
followed by latch
Latching
Latching
Min. Typ. Max.
55 65
57 60
33 39
13.5 14.4
2.2 2.6
Units
°C
V
A
V
A
Conditions
Min. Typ. Max.
Units
Input to Output - Reinforced
3000
Vrms
Input to Chassis - Basic
Output to Chassis (Ground)
1500
2250
Vrms
Vdc
The Main 54VDC output shall be provided with isolation between the output and chassis ground. It shall be able
to withstand the following tests:
a) 1500VRMS at 50Hz to 60Hz for 60s.
b) 2250 VDC for 60s.
There shall be no insulation breakdown during the test as defined in sub clause 5.2.2 of IEC 60950-1:2001. The
resistance after the test should be at least 2M ohms when measured at 500VDC.
The VRTN should be isolated from the 12VSB Return and the power module shall support PoE Electrical Isolation
Requirements.
Conditions
Description
Off No AC applied to any power module in host system
Off
Blinking Green
No AC applied to this power module only
AC Present & VSTANDBY “on”
Green
54VDC and VSTANDBY “on” and “OK”
Blinking Amber
Amber
Power Module Warning
Power Module Failure
There is provision for the connection of dual I2C buses for redundancy.
This enables two master devices to connect to single slave device(s) within the power module.
The power module is provided with a PMBus Management Interface that provides status, measurement and
control data.
Host system control input that can be used to turn on/off the Main 54VDC Output.
Standard
IEC/EN 61000-3-2
IEC/EN 61000-3-3
FCC 47 CFR Part 15; CISPR 22; EN55022
IEC/EN 61000-4-2;
IEC/EN 61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
IEC/EN 61000-4-6
IEC/EN 61000-4-8
IEC/EN 61000-4-11
Compliance
Complies with Class A Limits
Complies
Complies to Class A with 6dB margin
Complies to Class A with 6dB margin
4KV Contact discharge; Criteria A
8KV Operational air discharge; Criteria A
15KV non-operational air discharge, Criteria A
Complies
Complies
1KV/2KV; Criteria A performance
3VAC, 80% AM, 1KHz; Criteria A performance
3A/m
Complies
www.murata-ps.com/support
CPS_D1U4-W-1600-54-HBxC.A01 Page 3 of 6



No Preview Available !

D1U4-W-1600-54-HBxC
AC-DC Power Supply
OUTPUT CONNECTOR AND SIGNAL SPECIFICATION
DC and Signal Connector: FCI # 51732-028-LF
P1 P2 P3 P4 P5 P6
x1
x2
x3
x4
x5
AC_OK
P_GOOD
V_STBY
No User
Connection
V_STBY
RETURN
D
VOUT
VOUT
VOUT
VRTN
VRTN
VRTN
PS_ON
V_STBY
V_STBY
V_STBY
RETURN
V_STBY
RETURN
C
I_SHARE SYS_CONTR I2C DATA2 I2C CLOCK2 PS_PRESENT B
PS_KILL Vout SENSE+ Vout SENSE- I2C DATA1 I2C CLOCK1 A
Blade/ Pin Assignment
P1, P2, P3
P4, P5, P6
A2
A3
C2, C3, D3
C4, C5, D5
B1
Signal Name
VOUT
VRTN
VOUT_SENSE +
VOUT_SENSE -
VSTBY
VSTBY Return
I_SHARE
D1 AC_OK
D2 P_GOOD
A1 PS_KILL
B5 PS_PRESENT
C1 PS_ON_L
A4 I2C_SDA0 (SDA)
A5 I2C_SCL0 (SCL)
B3 I2C_SDA1 (SDA)
B4 I2C_SCL1 (SCL)
B2 SYS_CONTR
MATING CONNECTOR
Supplier
Press Fit, Straight
FCI --
Description
Main 54V Output Voltage
Main 54V Output Voltage, Return
Main 54V Output Voltage Sense +
Main 54V Output Voltage Sense -
Standby Voltage Output
Standby Voltage Output, Return
Analogue active current share bus
AC Source Voltage OK Signal
(Internally pull up to VSTANDBY by 10KΩ (3.3V & 5V
VSTANDBY).
10KΩ (to 5V) for 12 VSTANDBY
Power Good Signal
(Internally pull up to VSTANDBY by 10KΩ (3.3V & 5V
VSTANDBY).
10KΩ (to 5V) for 12 VSTANDBY
Floating pin; will turn off main output
Tied internally to VSTANDBY Return
Internally pull up to VSTANDBY by 1KΩ; can be driven with
open drain/collector switches
I2C compatible Data Bus
I2C compatible Data Bus
I2C compatible Data Bus
I2C compatible Data Bus
Host system control that can be used to turn on/off the Main
54V DC Output via an internal output switch within power
module. Low turns “on” output switch
Logic Level
0V to 8V
>2.4V (Active, OK)
<0.4V (not OK)
>2.4V (Active, GOOD)
<0.4V (not GOOD)
>2.4V “high”
<0.4V “low”
0V
>2.4V “high”
<0.4V “low”
>2.4V “high”
<0.4V “low”
Current
-4mA/+5mA
+4mA
-2mA
+4mA
-2mA
Press Fit, Right Angle
--
Solder Straight
--
Solder Right Angle
51762-1060-2000-ABLF
www.murata-ps.com/support
CPS_D1U4-W-1600-54-HBxC.A01 Page 4 of 6



D1U4-W-1600-54-HB3C datasheet pdf
Download PDF
D1U4-W-1600-54-HB3C pdf
View PDF for Mobile


Related : Start with D1U4-W-1600-54-HB3 Part Numbers by
D1U4-W-1600-54-HB3C AC-DC Power Supply D1U4-W-1600-54-HB3C
Murata Power Solutions
D1U4-W-1600-54-HB3C pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact