D-607-09 Datasheet PDF - Raychem

www.Datasheet-PDF.com

D-607-09
Raychem

Part Number D-607-09
Description Coaxial Cable Termination
Page 2 Pages


D-607-09 datasheet pdf
Download PDF
D-607-09 pdf
View PDF for Mobile


No Preview Available !

Fax-on-Demand: (800) 260-9099
(650) 361-6523
Before ordering check with
factory for most current data.
FAX ID Description
5600 Data sheet
Applications
Used for terminating coaxial cable to printed circuit boards.
Features/Benefits
Provides a completely shielded, low-resistance, matched-
impedance termination with very low VSWR (D-607 series
only).
Transparent Kynar insulation sleeve provides encapsulation,
inspectability, strain relief, and insulation.
Prefluxed solder preform provides a controlled soldering
process.
One-piece design offers easy installation and lower installed
cost.
Preinstalled PCB termination body provides convenience and
ease of installation.
Coaxial Cable Termination
SolderSleeve PCB/coaxial cable terminators
www.DataSheet4U.com
Product Options
Product
series
D-607
B-046
Product Selection Process
Typical application performance
Matched impedance up to 2.3 GHz
Effective transmission up to 100 MHz
Shield method
Metal body
Pin to ground
1. Select product series from the Prod-
uct Options table above.
2. Determine cable RG number or out-
side diameter dimensions.
Table A. D-607 Series Part Numbers
3. Select the appropriate part number
from Table A (D-607 series) or Table B
(B-046 series).
For D-607 (matched impedance) series,
determine straight or right-angle entry to
PCB and grid pattern, then select the
appropriate part number from Table A
below.
For B-046 (PinPak, or pin to ground)
series, determine hole spacing and
diameter. Refer to Table B for product
selection (see illustration beneath Table
B for cable dimensions).
Cable dimensions (mm/in)
Max. outside diameter
RG cable number
Jacket
174, 178, 179,
316, 404
1.5–3.55
(.060–.140)
*Limited for use with RG 174, 178, and 404.
Shield
1.1–3.15
(.045–.125)
Dielectric
0.60–2.25
(.025–.090)
Part number
Entry to PCB
Straight
grid 5.08 (.200)
D-607-09
Right angle
grid 5.08 (.200)
D-607-10
Straight
grid 2.54 (.100)
D-607-40*
Users should independently evaluate the suitability of the product for their application.
R Electrical Interconnect Products 9-45



No Preview Available !

Table B. B-046 Series Part Numbers
Cable dimensions (mm/in)
RG
cable number
178, 404
A
0.3–0.8
(.011–.032)
B
0.5–1.7
(.019–.067)
C
1.3–2.3
(.050–.091)
179, 316
0.3–1.6
1.2–2.5
.1.5–2.8
(.011–.063) (.047–.100) (.060–.110)
D
max.
3.4
(.134)
4.4
(.173)
Pin
diameter
0.6 (.023)
0.8 (.031)
0.6 (.023)
0.8 (.031)
Part number
www.DataSheet4U.com
Spacing between pins
2.54 (.100)
5.08 (.200)
6.35 (.250)
B-046-14-N
B-046-10-N
B-046-12-N
B-046-11-N
B-046-13-N
B-046-15-N
B-046-66-N
B-046-16-N
B-046-68-N
B-046-18-N
AB
CD
Product Characteristics
Material
Insulation
Solder and flux
Termination body/pin
Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride (Kynar)
Sn63 Pb37, RMA flux
Copper alloy, solder-plated
Typical performance
Voltage drop
Tensile strength
Dielectric strength
Temperature rating
Insulation resistance
2.0 mV
Exceeds strength of conductor
2.0 kV
–55°C to 150°C
1000 megohms
Electrical performance (typical) D-607 series only
Frequency
VSWR (D-607-09, -40)
350 MHz
1.04 max.
700 MHz
1.05 max.
2.3 GHz
1.09 max.
VSWR (D-607-10)
1.04 max.
1.09 max.
1.12 max.
Specifications/Approvals
Series
D-607
B-046
Installation
Raychem
RT-1404
RT-1404
For proper installation of these devices, the
correct heating tool and reflector attach-
ment must be used.
Any one of the following Raychem heating
tools is recommended:
HL1802E
AA-400 Super Heater
IR-1759 MiniRay
CV-1981
Refer to Raychem installation procedure
ES61139 for detailed instructions and
recommended reflector attachments.
You will find ordering information for these
tools in the Application Equipment section
of this catalog.
MiniRay, Raychem, and SolderSleeve are trademarks of Raychem Corporation.
Kynar is a trademark of Elf Atochem North America, Inc.
9-46 Electrical Interconnect Products R
Users should independently evaluate the suitability of the product for their application.



D-607-09 datasheet pdf
Download PDF
D-607-09 pdf
View PDF for Mobile


Related : Start with D-607-0 Part Numbers by
D-607-09 Coaxial Cable Termination D-607-09
Raychem
D-607-09 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact