AXP288 Datasheet PDF - X-Powers

www.Datasheet-PDF.com

AXP288
X-Powers

Part Number AXP288
Description PMIC Optimized For Multi-Core High-Performance System
Page 30 Pages


AXP288 datasheet pdf
Download PDF
AXP288 pdf
View PDF for Mobile

No Preview Available !

X-Powers
AXP288
Datasheet
PMIC Optimized For Multi-Core High-Performance System
Revision 1.07
2014.6.24



No Preview Available !

AXP288
PMIC Optimized For Multi-Core High-Performance System
Revision History
Revision
Rev 1.0
Rev 1.01
Rev 1.02
Rev 1.03
Rev 1.04
Rev 1.05
Rev 1.06
AXP288 Datasheet V1.06
Date
2013.12.10
2013.12.16
2013.12.18
2013.12.20
2014.1.24
2014.2.13
2014.5.23
Description
Version1.0 for Intel
1. Table9-3, T0 change to 1000μs
2. Update table 9-41 and related register
3. Update table 9-43, add 4.35V OCV~percentage
1. Add Pb free description
1. Change the SCK/SDA pull high voltage to 1.8V in typical application
circuit
1. Add power on interval description
2. Update table 10-92, change default value
3. Update table 10-77, remove bit[7] description
4. Change the capacitance of VCC_RTC to 10uF in typical application
circuit
5. Update table 10-74, remove bit[1:0] description
6. Update table 10-36, remove bit[2] description
7. Update table 10-32, add bit[6] description
8. Swap IRQ description in REG 43H/44H/4BH/4CH
9. Update table 10-89, remove bit[1:0] description
10. Add VBAT condition in power on source
11. Correct table 10-50 description
12. Update table 10-32, add bit[6] description
13. Update the hysteresis of temperature protection threshold
14. Update table 10-9, change bit[3] description
15. Update table 10-4, describe how to clear the indication
1. Update QFN76 package description
2. Add QFN76 board layout example
3. Update table 10-106, correct bit[2:0] description
4. Correct OCV Percentage Table description
1. Version change: Reg03H: 0x41 to 0x51
2. Reg14[3] default value change to 1
3. Use Reg14[7] as an enable bit for cold reset within global reset input
4. When BC module isn’t work, disable RID detection by default
5. Update section 9.1 / 9.1.1 / 9.4 / 9.4.2 / 9.4.5
6. Update RTC_LDO output capacitor’s value
7. Update Reg80 bit[7], bit[3],bit[1] description
Copyright © 2014 X-Powers Limited. All Rights Reserved.
2



No Preview Available !

Rev 1.07
2014.6.24
AXP288
PMIC Optimized For Multi-Core High-Performance System
8. Correct Reg3BH Bit[4],bit[3-0] description
9. Update the max charge current to 2.8A
10. Update electrical characteristics description
11. Correct Reg25H Reg26H default value to A8
12. Add table-1 for part number description
13. Add Package materials information Figure 11-3
14. Add RegA0H RegA1H real time value of battery voltage description
15. Update Reg80H bit[7] description
16. Update RegB8H bit[3] description
17. Add order information and table 11
18. Correct table 9-29 description
19. Correct Reg01H bit[4] description
20. Correct Reg59H, 5BH, 79H, 7BH, 7DH description
1. Add AXP288D description
AXP288 Datasheet V1.06
Copyright © 2014 X-Powers Limited. All Rights Reserved.
3



No Preview Available !

AXP288
PMIC Optimized For Multi-Core High-Performance System
Declaration
X-Powers cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in an X-Powers product.
No circuit patent licenses, copyrights, or other intellectual property rights are implied. X-Powers reserves the right to make
changes to the specifications and products at any time without notice.
AXP288 Datasheet V1.06
Copyright © 2014 X-Powers Limited. All Rights Reserved.
4



AXP288 datasheet pdf
Download PDF
AXP288 pdf
View PDF for Mobile


Related : Start with AXP28 Part Numbers by
AXP288 PMIC Optimized For Multi-Core High-Performance System AXP288
X-Powers
AXP288 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact