External Components Description
Inverting input resistance which sets the closed-loop gain in conjunction with
Rf. This resistor also forms a high pass filter with Ci at fc = 1/(2πRi*Ci).
Input coupling capacitor which blocks the DC voltage at the amplifiers input
terminates. Also creates a high-pass filter with Ri at fc = 1/(2πRi*Ci).
Feedback resistance which sets the closed-loop gain in conjunction with Ri. The
gain is AVD=2*(Rf/Ri).
Supply bypass capacitor which provides power supply filtering.
Bypass pin capacitor which provides half-supply filtering. Refer to the section.
Absolute Maximum Ratings
-0.3V to 6V
-0.3V to VDD+0.3V
See Dissipation Rating Table
Junction Temperature -40℃ to +150℃
Storage Temperature -65℃ to +150℃
NOTE: Absolute Maximum Ratings indicate limits
beond which damage to the device may occur.
Operating Rating indicate conditions for which the
device is functional, but do not guarantee specific
The following specifications apply for the circuit shown in Figure 1, unless otherwise specified.
Limits apply for TA = 25℃.
VDD = 5V
VIN = 0V, 8Ω Load
IDD Quiescent Power Supply Current
VIN = 0V, No Load
ISD Shutdown Current
VIN=0V, VSHD=GND, No Load
- 4 - V1.0