00BC0WF Datasheet PDF - Rohm

www.Datasheet-PDF.com

00BC0WF
Rohm

Part Number 00BC0WF
Description BA00BC0WF
Page 2 Pages


00BC0WF datasheet pdf
Download PDF
00BC0WF pdf
View PDF for Mobile

No Preview Available !

www.DataSheet4U.com
LDO Regulator With Shutdown Circuit
BA00BC0WF
Description
BA00BC0WF is a PNP output LDO
regulator IC with the output current of 0.5A
and a voltage accuracy of ± 2%.
Output voltage can be set (1.5V to 12V) by
external resistor. Over-current protection
circuit and thermal protection circuit are
incorporated to prevent IC from being
damaged by short and thermal break down.
Dimension (Unit : mm)
5.0±0.2
85
14
1.27
0.4±0.1
0.15±0.1
0.1
Features
1) Maximum output current : 0.5A
2) Output voltage setting by external resistor
3) Low drop-out voltage(1.5V to 12V) type with PNP output
4) Built-in over-current protection circuit to
prevent IC from being damaged by short
5) Built-in thermal protection circuit
6) Built-in ON/OFF switch to realize the shutdown current 0uA
7) SOP8 package
8) C pin output voltage accuracy : ± 2%
SOP8
Applications
Printer, TV, DVD and Storage etc.



No Preview Available !

Absolute Maximum Ratings (Ta=25˚C)
Parameter
Symbol
Limits
Unit
Supply voltage
Vcc
18 *1
V
Power dissipation
Pd
620 *2
mW
Operating temperature range Topr
-40 ~ +85
˚C
Storage temperature range
Tstg
-55 ~ +125
˚C
Junction temperature
Tjmax
125
˚C
**21
Do not however exceed Pd.
Mounted on 70mm x 70mm
x
1.6mm
glass-epoxy
PCB
Derating
in
done
at
6.2mW/˚C
for
operating
above
Ta=25˚C
Recommended Operating Conditions (Ta=25˚C)
Parameter
Symbol Min. Typ.
Input voltage
VCC 3.0 -
Output current
Io - -
Output voltage
VOUT 1.5 -
Max.
16.0
0.5
12.0
Unit
V
A
V
www.DataSheet4U.com
Electrical Characteristics (Unless otherwise specified, Ta=25˚C, Vcc=3.3V, Io=150mA, R1=30k, R2=30k)
Parameter
Symbol Min. Typ. Max. Unit
Conditions
Shut down current
ISD - 0 10 µA Vctl=0V
Vc pin voltage
Vc 1.225 1.250 1.275 V Io=10mA
Output voltage
Vo - 2.50 - V Io=150mA
Dropout voltage
Vd - 0.18 0.30 V Vcc=2.5V
Peak output current
Io 0.5 - - A
Ripple rejection
R.R. 44 55 - dB f=120Hz, ein=-20dBV, Io=100mA
Line regulation
Reg.I - 20 50 mV Vcc=4.5V 16V
Load regulation
Reg.L
Temperature coefficient of output voltage *1 Tcvo
- 50 150 mV Io=0mA 500mA
- ±0.02 - % / °C Io=5mA, Tj=0~125°C
Bias current
Ib - 0.6 - mA Io=0mA
Short circuit output current
Ios - 0.4 - A Vcc=16V
Stand-by ON level
Vth1
2.0
-
-
V ACTIVE MODE, Io=0mA
Stand-by OFF level
Vth2
-
- 0.8 V OFF MODE, Io=0mA
Input high current
Iin 40 80 130 µA Vctl=3V, Io=0mA
• This product is not designed for protection against radioactive rays.
**1
Designed Guarantee.(Outgoing inspection is not done all products.)
All characteristics are measured with a capacity across the input of 0.33µF and a capacity across the output of 0.22µF.
Measurement is done at Ta Tj, and variations in the parameter of all measurement(expect Temperature Coefficient of Output
Voltage)caused
by
temperature
change
are
not
considered.
Application Circuit
BA00BC0WF
Vcc 1
CTL 8
GND 6.7
Vref
TSD
OCP
OUT 3
R2
C5
R1
N.C. 2.4



00BC0WF datasheet pdf
Download PDF
00BC0WF pdf
View PDF for Mobile


Related : Start with 00BC0W Part Numbers by
00BC0WF BA00BC0WF 00BC0WF
Rohm
00BC0WF pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact